To avoid these ads, REGISTER NOW!

4 Barrel barn build.

To avoid these ads, REGISTER NOW!
OP
W

Woodboxkiwi

Well-known member
Joined
Jun 10, 2026
Messages
55
After yesterday's debacle I was happy to get the high wall fabricated on the deck.IMG20260826164202.jpg
I braced it up temporarily to move it into position.
IMG20260826164220.jpg
I then set about standing it up against the existing wall with a chain hoist.
IMG20260826170353.jpg
I added more bracing to hold it upright while moving it into its final position.
IMG20260826174519.jpg
I pulled it sideways with a load strap and a bit of good old leverage.
IMG20260826174632.jpg
In position ready for the top and bottom plate extensions to tie it all in, along with a couple of permanent braces at the top back onto the other walls.
IMG20260826174607.jpg
Another pile of sticks closer to the finish line!
 
OP
W

Woodboxkiwi

Well-known member
Joined
Jun 10, 2026
Messages
55
It was a funny old day today, equinox weather is kicking in. Every time I headed out to get something done a rain squall would blow through and get everything wet and cold.
I did manage to get the diagonal strap bracing onto the high wall that I finished framing last week.
IMG20260901165540.jpg
The rest of the day was spent writing a list of and doing sketches of all the flashings that we will be needing soon, also doing some research on dimensions for the roller doors. I will be framing up the walls that the doors hang off next, so better be sure of sizings before we start chopping up lengths of timber.
I also made contact with the guy that will be manufacturing the continuous spouting for us. He will be here later in the week. I figured that I would rather have the spouting made and sitting around until I need it, rather than have water running all over the ground making a big muddy puddle.
 

Prospecter

Well-known member
Joined
May 16, 2015
Messages
2,535
Location
Maine
Nice work! I like that style barn. Around here we call that a "Monitor Barn." Great design for a one man construction crew. For all the hassle, I still much prefer working alone. Always have.

Looks like you might be mostly finished with the heavy work before your hot weather sets in.
 
OP
W

Woodboxkiwi

Well-known member
Joined
Jun 10, 2026
Messages
55
Nice work! I like that style barn. Around here we call that a "Monitor Barn." Great design for a one man construction crew. For all the hassle, I still much prefer working alone. Always have.

Looks like you might be mostly finished with the heavy work before your hot weather sets in.
We are hoping to have a roof on within the next month. Once the trusses and rafters go on things will speed up.
Thanks for the support.
 
To avoid these ads, REGISTER NOW!
OP
W

Woodboxkiwi

Well-known member
Joined
Jun 10, 2026
Messages
55
Another day, somewhat interrupted by a trip to town for hardware, but some progress all the same.
The front wall has a pair of manufactured studs made from 3 8x2 bolted together. Yesterday I made the first of the pair and stood it up. Today I added the girts and noggs, then made the second stud for tomorrow.IMG20260903170834.jpg
 
OP
W

Woodboxkiwi

Well-known member
Joined
Jun 10, 2026
Messages
55
In today's episode we stood up the second manufactured post and framed in the gaps. IMG20260904152739.jpg
Coming up after the break, we elevate the top plate into position, followed soon after by a pair of under studs and door opening lintel with in-fill framing......stay tuned!
 
To avoid these ads, REGISTER NOW!
Top Bottom