4-way switch question

[IGOR]

So I have a ranch style house with two sliding doors opening onto patio. There is an outside light near each sliding door on a 3-way switch with switches by each door.

I would like to put the shop exterior lights on the same switch so I can turn on/off all of the outside lights from either inside the house or inside the shop.

Is there a remote switch I can install in the shop to make this happen easy? Or do I need to wire a standard 4-way switch (run wire from the house light circuit to the shop switch box)

Thanks

 

[Zeke]

I think this will work.
http://kbase.x10.com/wiki/TM751

 

[volleyball]

If you can wire, then do that. Another way is to get the remote light sockets and you will be able to turn on or off from your pocket.

 

[The Cobbler]

I think this will work.
http://kbase.x10.com/wiki/TM751

that is one part of a possible solution. that , with a remote will control 1 lamp. you would need additional modules for each other circuit. x-10 is reasonably decent, not 100%.