Here's a floor plan I designed for my 45x65 ft shop. The right side of the building is a "dirty shop" measuring 25x45 ft for doing body work, welding, and other restoration. It is deep enough to have a body off of a frame and have plenty of room around both for workbenches, engine test stands and cherry pickers and welders, etc. This space will have a 12 ft OHD front and back for plenty of breeze and drive through capability.
There is a front and center finished man cave space measuring about 18 x 22 ft with a full bath and kitchenette/bar area, large screen TV, etc.
Then an L shaped space on the left/back for storage of about 6 clean cars.
There will be a 6 x 40 covered front porch to sit out and have a beer.
Let me know what you think of the design.
There is a front and center finished man cave space measuring about 18 x 22 ft with a full bath and kitchenette/bar area, large screen TV, etc.
Then an L shaped space on the left/back for storage of about 6 clean cars.
There will be a 6 x 40 covered front porch to sit out and have a beer.
Let me know what you think of the design.