72" masterface toolbox question

[street131]

I have 72" masterforce bottom box and i put 2 of the 36" boxes on top, the problem i have now is tbst my box is extremely full and very heavy. I can buy a small side box to put on the 72" but im worried about putting even more weight onto the 72" box, would you feel ok to have that side box on the toolbox?

 

[930dreamer]

They made side boxes for a reason, add it and load it up.

 

[bobcatdan]

How well does it roll? If it still moves ok, I'd say it's fine. Box weight capacity is based on the caster.

 

[Mr_B]

Is this new model or old model masterforce .
If you not moving it then not much of a problem, if you are rolling it then issues can arise if as the casters be working hard .
check weight limit on your model and review it .

 

[Jeffgage]

This is the newer bottom and side box both 24" deep. The 2 top boxes are the older versions I think 19" deep. I have moved it once (only had for about 1 month). And it moves pretty easy

 

[Jeffgage]

Message sent

 

[awill47]

This is the newer bottom and side box both 24" deep. The 2 top boxes are the older versions I think 19" deep. I have moved it once (only had for about 1 month). And it moves pretty easy

did you paint your handles?? how did you do it? how is it holding up ?


Sent from my iPhone using The Garage Journal mobile app

 

[Jeffgage]

It's not paint. I bought some carbon fiber on Ebay and used a heat gun. It is working well so far