A Real Blast Cabinet

[jonathan75]

How about this FREE OFFER for a set of Plans to Build Your Own Blasting Cabinet?

If you are posting on this thread ("A Real Blast Cabinet") and would like a Free Set of Plans to build your own cabinet, we can supply the following FREE OF CHARGE and we will send by First Class Mail the same day:

1) Set of Plans - see http://www.tptools.com/Build-Your-Own-Cabinet-Plans,337.html?b=s*PLANS (Regular $9.95).
2) Latest TP Tools Catalog describing all of our cabinets, cabinet parts, abrasives and more - 164 Pages.
3) Current Sales Flyer.

Offer good only for posters on this thread until June 30, 2015.

PHONE: This can be done by calling TP Tools at 800-321-9260 between 8 AM and 4:30 PM weekdays and asking for either of our two Office Managers, who are aware of this offer. Give your name used on this site for reference, along with your mailing address. They will check to be sure you are currently posting on this thread. If not yet posting, go ahead and do so before calling. All the above will be sent via 1st Class Mail the same day at no charge - U.S. & Canada only.

EMAIL: Since offer is at no charge, you can also order by email by sending your information with your request to: info@tptools dot com * Our actual email address not posted to minimize spam - you can figure it out however. Sorry no export other than to Canada.

E-mail sent. One day I may finish my air compressor!

 

[mikefromme]

How about this FREE OFFER for a set of Plans to Build Your Own Blasting Cabinet?

If you are posting on this thread ("A Real Blast Cabinet") and would like a Free Set of Plans to build your own cabinet, we can supply the following FREE OF CHARGE and we will send by First Class Mail the same day:

1) Set of Plans - see http://www.tptools.com/Build-Your-Own-Cabinet-Plans,337.html?b=s*PLANS (Regular $9.95).
2) Latest TP Tools Catalog describing all of our cabinets, cabinet parts, abrasives and more - 164 Pages.
3) Current Sales Flyer.

Offer good only for posters on this thread until June 30, 2015.

PHONE: This can be done by calling TP Tools at 800-321-9260 between 8 AM and 4:30 PM weekdays and asking for either of our two Office Managers, who are aware of this offer. Give your name used on this site for reference, along with your mailing address. They will check to be sure you are currently posting on this thread. If not yet posting, go ahead and do so before calling. All the above will be sent via 1st Class Mail the same day at no charge - U.S. & Canada only.

EMAIL: Since offer is at no charge, you can also order by email by sending your information with your request to: info@tptools dot com * Our actual email address not posted to minimize spam - you can figure it out however. Sorry no export other than to Canada.

Great deal, thank you.

Perfect timing, I've been trying to talk myself into settling for the HF cabinet but building my own with your kit sounds like a good next project.

Email sent.

 

[volleyball]

Just a heads up.
Some old old track type printers had cabinets around them to deaden the sound.
We picked up four of them for free.
Greatest blast cabinet I ever had.
It took very little time to convert.
Look around. You'll find one somewhere for just about free.
They look just about like that restored cabinet in the post above except they load by the front and the top opening away from you as one door instead of through the side so there is no reason for free standing.
The one in the picture is for a desk top printer. The free stander is as strong as a bast cabinet. Almost all of them have a viewing window like on a blaster.
All the mechanicals needed are available at tpools.com
Good hunting.

I hated working on the daisy wheel printers that a lot of offices had them in. But they did work.

 

[CoopVA]

Wow Coop VA- looks better than new. Can you use a current Manual and a set of Skat Blast Labels? (Not available without a picture of old cabinet, which you have posted). If so, just call us at 800-321-9260 and mention Fred's post on the Garage Journal Forum. They will mail the logos, manual and our latest catalog via 1st class mail free of charge. Our Office Manager is aware of this offer if any questions when you call.



Fred

I sure could! I actually just ordered some nozzles and gloves earlier today... I'll give a call on Monday!

Thanks!

 

[72Corvette]

Sounds like a great offer. Email sent.

Thanks!

Glen

How about this FREE OFFER for a set of Plans to Build Your Own Blasting Cabinet?

If you are posting on this thread ("A Real Blast Cabinet") and would like a Free Set of Plans to build your own cabinet, we can supply the following FREE OF CHARGE and we will send by First Class Mail the same day:

1) Set of Plans - see http://www.tptools.com/Build-Your-Own-Cabinet-Plans,337.html?b=s*PLANS (Regular $9.95).
2) Latest TP Tools Catalog describing all of our cabinets, cabinet parts, abrasives and more - 164 Pages.
3) Current Sales Flyer.

Offer good only for posters on this thread until June 30, 2015.

PHONE: This can be done by calling TP Tools at 800-321-9260 between 8 AM and 4:30 PM weekdays and asking for either of our two Office Managers, who are aware of this offer. Give your name used on this site for reference, along with your mailing address. They will check to be sure you are currently posting on this thread. If not yet posting, go ahead and do so before calling. All the above will be sent via 1st Class Mail the same day at no charge - U.S. & Canada only.

EMAIL: Since offer is at no charge, you can also order by email by sending your information with your request to: info@tptools dot com * Our actual email address not posted to minimize spam - you can figure it out however. Sorry no export other than to Canada.

 

[garagejunkie]

Wow..Always wanted a blast cabinet.This sounds like the way to do it!!!Giving the call on Monday.WooHoo lol

 

[87jeepwrangler]

How about this FREE OFFER for a set of Plans to Build Your Own Blasting Cabinet?

If you are posting on this thread ("A Real Blast Cabinet") and would like a Free Set of Plans to build your own cabinet, we can supply the following FREE OF CHARGE and we will send by First Class Mail the same day:.

Awesome. Sending an email now. Thanks

 

[larry4406]

Fritz - thanks for the plan offer! I will be requesting mine also.

 

[bulletbob]

Hard to beat an offer for the free plans. All I got is time so I need another project

 

[Lespaul]

Perfect timing on the free plans. This was going to be my next project anyway.

 

[kythri]

Very cool, folks! Very cool.

Thank you!

 

[davin24]

wow thanks for free contribution. Will definitely buy the accessories from you guys. thanks jr.

 

[bob15]

wow thanks for free contribution. Will definitely buy the accessories from you guys. thanks jr.

Best part with TP Tools is many, if not most of the parts for building your own cabinet are USA made.

 

[NUTTSGT]

Fred

This is a mighty nice offer for the crowd here at Garage Journal. When I first saw you post, I was worried about a company spamming the site, but I see now that is not an issue. Welcome to GJ and one day, I hope to make the trip to your facility, even if it is to browse around.

 

[ShadowRuleZ]

Thanks for the offer, I've been looking at your stuff for a few years now. Will be great to see how it all works.

 

[torqueman2002]

How about this FREE OFFER for a set of Plans to Build Your Own Blasting

I just sent an eMail, to replace my mis-placed plans.

 

[wyo george]

I guess it's about time I finally got around to building a larger blast cabinet. Thanks for the generous offer of free plans.

G

 

[ed_v]

Very cool of TP Tools to offer the set of plans. I will be requesting a set.

Thank you,

Ed

 

[Jallred]

We have one of your cabinets at our fleet shop at work. They love it. Some day I would like to get one too. I might build one in the mean time .

 

[nanofrog]

How about this FREE OFFER for a set of Plans to Build Your Own Blasting Cabinet?

If you are posting on this thread ("A Real Blast Cabinet") and would like a Free Set of Plans to build your own cabinet, we can supply the following FREE OF CHARGE and we will send by First Class Mail the same day:

1) Set of Plans - see http://www.tptools.com/Build-Your-Own-Cabinet-Plans,337.html?b=s*PLANS (Regular $9.95).
2) Latest TP Tools Catalog describing all of our cabinets, cabinet parts, abrasives and more - 164 Pages.
3) Current Sales Flyer.

Offer good only for posters on this thread until June 30, 2015.

EMAIL: Since offer is at no charge, you can also order by email by sending your information with your request to: info@tptools dot com * Our actual email address not posted to minimize spam - you can figure it out however. Sorry no export other than to Canada.

Thank you.

 

[ZRX61]

I've been wanting one for a few years now, but the shipping to California kills it for me.
Any chance we could have a CA group buy or something to get the shipping down to zone 1 cost?

Keep an eye open for free shipping deals, had mine shipped to LA for free

 

[ZRX61]

My 960 has been sitting in storage for 3 years now, the pile of **** that I have waiting to be blasted is getting a tad large...

 

[tarbellb]

Hey I could use some plans to build a kickass cabinet. Nothing better then supporting a USA company building awesome products.

Thanks!

 

[oldsfan442]

What perfect time to get in on this thread. I am getting ready to refurbish this cabinet that I picked up last year. No name on in that I can see. Its a big beast. It measures 40 wide by 40 deep by 30 high. The cabinet can be opened where the clamps are in the front or with a door on the size. It's way to heavy to open the whole thing and where it's going to be used, I wouldn't work anyway. So I am just going to use the side door.

The cabinet needs a bunch of work. All the seams need to be resealed, needs new gloves, needs a fresh air intake and a vac opening, lighting and glass. I am going to use some ideas I have seen like the LED puck lights that go just below the gloves and a big florescent or more LED lighting on top. Im puzzled on how the glass was held in the cabinet. There are no holes anywhere around the opening where the glass goes. Any ideas?

Well hopefully the TP Tool catalog will have what I need to get this cabinet back up and running. I can't wait to see what they have to offer.

Anyway, here is the only pic I have. It's a big cabinet. Cant wait to use it. Thanks for looking.

Bryan

 

[burger]

How about this FREE OFFER for a set of Plans to Build Your Own Blasting Cabinet?

If you are posting on this thread ("A Real Blast Cabinet") and would like a Free Set of Plans to build your own cabinet, we can supply the following FREE OF CHARGE and we will send by First Class Mail the same day:

1) Set of Plans - see http://www.tptools.com/Build-Your-Own-Cabinet-Plans,337.html?b=s*PLANS (Regular $9.95).
2) Latest TP Tools Catalog describing all of our cabinets, cabinet parts, abrasives and more - 164 Pages.
3) Current Sales Flyer.

Offer good only for posters on this thread until June 30, 2015.

PHONE: This can be done by calling TP Tools at 800-321-9260 between 8 AM and 4:30 PM weekdays and asking for either of our two Office Managers, who are aware of this offer. Give your name used on this site for reference, along with your mailing address. They will check to be sure you are currently posting on this thread. If not yet posting, go ahead and do so before calling. All the above will be sent via 1st Class Mail the same day at no charge - U.S. & Canada only.

EMAIL: Since offer is at no charge, you can also order by email by sending your information with your request to: info@tptools dot com * Our actual email address not posted to minimize spam - you can figure it out however. Sorry no export other than to Canada.

Thank you for the generous offer!

 

[arrowhead]

Wow this is an awesome opportunity. Sending an email shortly. Thank you!!

 

[Kracin]

a lot of people complain about the HF blast cabinets, but maybe the one i've got is different because its a lot older? not sure how the newer ones are but the one i have, me and my dad purchased about 11 years ago, and it never had issues with leaking sand out of weird spots, barely replaced any of the tips. and we did a ton of sandblasting while rebuilding a whole car.

 

[1956f100]

Been thinking about obtaining a large 970 / 976 size cabinet for some upcoming projects. Been weighing the costs of outright purchase versus
building my own. Have easy access to raw metal materials and have a plasma cutter / welder at home. Fred - Your free plan offer is something I want to pursue so I will be contacting TP Tools. Thanks, Don

 

[mattm55]

A+ on the TP Tools offer.

I already own a SB 960Pro which I bought last year after doing all the online research. It's my FAVORITE shop tool.

Matt

 

[cowboy73]

I just received a confirmation email from TP Tools that they were sending out the plans and catalog! Fred, thanks so much for this offer. It was very generous.

 

[xxxlmark]

I was using the blast cabinet at school last night and was wishing I had one at home. I woke up this morning and find a free offer on plans. Tp tools just made my day a whole lot better.

 

[sbosecker]

How about this FREE OFFER for a set of Plans to Build Your Own Blasting Cabinet?

If you are posting on this thread ("A Real Blast Cabinet") and would like a Free Set of Plans to build your own cabinet, we can supply the following FREE OF CHARGE and we will send by First Class Mail the same day:

1) Set of Plans - see http://www.tptools.com/Build-Your-Own-Cabinet-Plans,337.html?b=s*PLANS (Regular $9.95).
2) Latest TP Tools Catalog describing all of our cabinets, cabinet parts, abrasives and more - 164 Pages.
3) Current Sales Flyer.

Offer good only for posters on this thread until June 30, 2015.

PHONE: This can be done by calling TP Tools at 800-321-9260 between 8 AM and 4:30 PM weekdays and asking for either of our two Office Managers, who are aware of this offer. Give your name used on this site for reference, along with your mailing address. They will check to be sure you are currently posting on this thread. If not yet posting, go ahead and do so before calling. All the above will be sent via 1st Class Mail the same day at no charge - U.S. & Canada only.

EMAIL: Since offer is at no charge, you can also order by email by sending your information with your request to: info@tptools dot com * Our actual email address not posted to minimize spam - you can figure it out however. Sorry no export other than to Canada.

FRITZ OHIO,

I would like to participate in this extremely generous offer.

Best regards,

Scott

 

[CoopVA]

Labels and Manual are on the way! Thanks Fred!


Sent from my iPhone using Tapatalk

 

[TC2Auto]

I have been heavily researching blast cabinets recently and saw that TP Tools is offering free plans to build one.

Count me in.

 

[Bigblue&Goldie]

TP, it's great to see you posting on Garage Journal. Someday when I have a bigger shop, you guys will be one of my first phone calls. Thanks for keeping production in the USA.

 

[Beefbuzz]

How about this FREE OFFER for a set of Plans to Build Your Own Blasting Cabinet?

If you are posting on this thread ("A Real Blast Cabinet") and would like a Free Set of Plans to build your own cabinet, we can supply the following FREE OF CHARGE and we will send by First Class Mail the same day:

1) Set of Plans - see http://www.tptools.com/Build-Your-Own-Cabinet-Plans,337.html?b=s*PLANS (Regular $9.95).
2) Latest TP Tools Catalog describing all of our cabinets, cabinet parts, abrasives and more - 164 Pages.
3) Current Sales Flyer.

Offer good only for posters on this thread until June 30, 2015.

PHONE: This can be done by calling TP Tools at 800-321-9260 between 8 AM and 4:30 PM weekdays and asking for either of our two Office Managers, who are aware of this offer. Give your name used on this site for reference, along with your mailing address. They will check to be sure you are currently posting on this thread. If not yet posting, go ahead and do so before calling. All the above will be sent via 1st Class Mail the same day at no charge - U.S. & Canada only.

EMAIL: Since offer is at no charge, you can also order by email by sending your information with your request to: info@tptools dot com * Our actual email address not posted to minimize spam - you can figure it out however. Sorry no export other than to Canada.

Sweet! USA USA USA

 

[Charles (in GA)]

I have a 960 or a 970, forget which. Used it alot at first, not so much nowdays, but its there when I need it. I have the vac that goes with it, and the caster kit, very useful to move it for cleaning.

Charles

 

[James E]

My cabinet is a Skat Blast like the one in nohog's post. Mine's not on the company website but I bought it years ago. It was an indispensable tool when I restored my Mustang and friends have used it a lot to restore their own cars. I used it just last month when I cleaned up an old ax head that some scouts found on our last campout.

I have always been glad that I spent a little extra to get the Skat Blast as in all the years I've had it, I've never had a single problem with it.

I added the bottom tray and casters and roll it outside when I clean parts. I hook up an old shop vac that has held up very well considering the dust that the motor is ingesting and I wear a respirator whenever I blast--even outside. Without a dedicated dust collector, you really need to wear a respirator.

On my next project, before I start using the blaster a lot again, I'll invest in a dust collection system. I've always wanted one but I really need to be working on a large project to justify the cost and floor space.

 

[why worry]

TP tools, what an amazing offer I will be calling in the morning.
Thanks,

 

[Lwel9226]

I have a HF cabinet that I upgraded with TP Tools foot pedal and gun.. I also added TP Tools Vacuum system. Very large improvement... Ran silicone caulk on all the joints of the cabinet but still leaks pretty bad... Need to do something different. Thank you Fred for the great offer.

Lynn W