To avoid these ads, REGISTER NOW!

A Whatsit handle???

jimreed2160

Well-known member
Joined
Aug 7, 2016
Messages
3,589
Location
Tallahassee FL
My buddy likes to drop off unusual stuff for me to play with. Most of it is easy to identify, but this new piece has me stumped. Any clues?

DSCN0981.jpg


DSCN0982.jpg


The froe under it is pretty easy. But what is the handle thing? It is heavy iron and has three holes that allow its grip to be adjusted. My first thought was an ice tong for blocks, but all of those seem to have spikes. This tool has paddles and does not look like it would grip a heavy ice block very well. Your guesses are welcome.
 
To avoid these ads, REGISTER NOW!

2oolhound

Well-known member
Joined
Dec 18, 2010
Messages
5,918
Location
BC Canada
It looks like it could have been a handle for an old one man cross cut saw although I've never seen one like it. They were usually riveted on.

Slow typer here, brick tongs makes more sense.
 

VocaTexas

Well-known member
Joined
Jun 20, 2014
Messages
808
It's a battery lifter. The flats grip the sides of the battery to lift it in and out of the battery box.
 
To avoid these ads, REGISTER NOW!

drivesitfar

Well-known member
Joined
Oct 23, 2013
Messages
36,003
Location
Pacific Northwest
Bricks was going to be my guess too, but it might also carry other items like batteries and in your case maybe some timbers. i also have a fro that i got from my Gramps for splitting cedar blocks into shakes.
 

Zeke

Well-known member
Joined
Aug 13, 2009
Messages
17,176
Location
Long Beach CA, the sewer by the sea.
Bricks are 2.25" in height so at 13.5" that's 6 bricks. Haul one in each hand all day and you'll know why it's only for 6.

If you look up "vintage battery carrier" and such, you won't see one of these mentioned. And battery carriers have flat pads with rubber on them for grip. The tool above needs no grips for bricks. In fact, they wouldn't last a day.
 
To avoid these ads, REGISTER NOW!
Top Bottom