sqaurelizard
Well-known member
Hi Guys
I am at the design stage of trying to build a sliding gate for the front of my house. Have most of the sliding part worked out suppport post, ground rail etc what I am struggling with is how to secure the cedar cladding infill.
Previously built a smaller swing gate which I made the frame out of angle, laid the ceder into the frame and sandwiched with a box frame to fit inside the angle, worked out pretty ok looks very clean from the front and pretty good from the back but I dont see how I can make it work on a larger scale
I am at the design stage of trying to build a sliding gate for the front of my house. Have most of the sliding part worked out suppport post, ground rail etc what I am struggling with is how to secure the cedar cladding infill.
Previously built a smaller swing gate which I made the frame out of angle, laid the ceder into the frame and sandwiched with a box frame to fit inside the angle, worked out pretty ok looks very clean from the front and pretty good from the back but I dont see how I can make it work on a larger scale