To avoid these ads, REGISTER NOW!

Adding on for more shop space

Joined
Jan 8, 2007
Messages
18
Location
Windsor Locks, CT
Hi all,
We had decided to add onto the existing 24 x 24 garage with an additional 22 x 16 area.

The old garage was getting pretty tight with my transmission Overhaul area and working on the Model A so it was time to go out some. I didn't want to kill off my back yard view so an area that was useable and sized right would be the best way to go.

Here are some pictures and I'll work on more as we move along.

Cliff Ramsdell
 

Attachments

  • 001.jpg
    001.jpg
    149.4 KB · Views: 40
  • 002.jpg
    002.jpg
    147.6 KB · Views: 39
  • 006.jpg
    006.jpg
    150.3 KB · Views: 42
  • 008.jpg
    008.jpg
    152 KB · Views: 38
  • 011.jpg
    011.jpg
    149.4 KB · Views: 35
  • 012.jpg
    012.jpg
    143.8 KB · Views: 36
  • 010.jpg
    010.jpg
    150.9 KB · Views: 37
To avoid these ads, REGISTER NOW!
OP
C
Joined
Jan 8, 2007
Messages
18
Location
Windsor Locks, CT
When we bought the house we knew we would be adding on so at the time we finished off the garage with power, insulation and sheet rock we also framed out and installed a header for a 7 x 9 opening in the back wall so when it was time to remove the wall it was just a matter of pulling down the sheet rock and insulation and cutting it out.

With the footings done they poured the foundation and pulled the forms, it's moving along.

Cliff Ramsdell.
 

Attachments

  • 020.jpg
    020.jpg
    150.8 KB · Views: 36
  • 019.jpg
    019.jpg
    148.3 KB · Views: 36
  • 017.jpg
    017.jpg
    148.1 KB · Views: 34
  • 016.jpg
    016.jpg
    142.7 KB · Views: 38
  • 015.jpg
    015.jpg
    144.6 KB · Views: 33
  • 014.jpg
    014.jpg
    149.4 KB · Views: 35
  • 013.jpg
    013.jpg
    149.8 KB · Views: 34
Last edited:
OP
C
Joined
Jan 8, 2007
Messages
18
Location
Windsor Locks, CT
I guess I should update that stuff, Huh?

Located in Windsor Locks, CT. Not bad but need heat in the winter if you want to do anything in the shop, kinda like A/C down there.

I lived in your neck of the woods for a while, you can add more layers when it gets cold outside but people don't care much for a guy wearing only a sock trying to stay cool :headscrat don't understand that one much.

Cliff Ramsdell

Looking good Cliff.

I take it your in cold weather country?

Keep us posted on your build.
 
OP
C
Joined
Jan 8, 2007
Messages
18
Location
Windsor Locks, CT
They got it ready to back fill and pour the floor.

Since doing the floor now would include cutting the original foundation so the floors would be the same height it was supposed to be done once the walls were framed and the roof was on, since it can rain and it would all go into the existing garage.

We'll see that didn't work well. The day after they poured the floor, it was suppose to rain HARD. Three sides and the only place for the rain to go is inside the garage, not good.

Cliff Ramsdell
 

Attachments

  • 043.jpg
    043.jpg
    146.7 KB · Views: 52
  • 041.jpg
    041.jpg
    147.6 KB · Views: 50
  • 040.jpg
    040.jpg
    145.9 KB · Views: 60
  • 038.jpg
    038.jpg
    144.9 KB · Views: 69
  • 028.jpg
    028.jpg
    138.3 KB · Views: 52
  • 027.jpg
    027.jpg
    148.9 KB · Views: 53
  • 024.jpg
    024.jpg
    149.2 KB · Views: 51
To avoid these ads, REGISTER NOW!
OP
C
Joined
Jan 8, 2007
Messages
18
Location
Windsor Locks, CT
After some hard rain, we got walls and a roof, moved fast at this point.

Cliff Ramsdell
 

Attachments

  • 046.jpg
    046.jpg
    141.8 KB · Views: 78
  • 049.jpg
    049.jpg
    145.3 KB · Views: 63
  • 050.jpg
    050.jpg
    141.3 KB · Views: 53
  • 045.jpg
    045.jpg
    149.9 KB · Views: 62
OP
C
Joined
Jan 8, 2007
Messages
18
Location
Windsor Locks, CT
Exterior finished and ready for the inside work to start. Got the electrical and insulation ready to go, maybe next week.

Cliff Ramsdell
 

Attachments

  • 051.jpg
    051.jpg
    140.9 KB · Views: 30
  • 052.jpg
    052.jpg
    146.6 KB · Views: 30
  • 054.jpg
    054.jpg
    146.4 KB · Views: 32
OP
C
Joined
Jan 8, 2007
Messages
18
Location
Windsor Locks, CT
More pics of the inside. The ties were there they just had not been installed when I took the other inside pictures.

Cliff Ramsdell
 

Attachments

  • 057.jpg
    057.jpg
    145.5 KB · Views: 26
  • 060.jpg
    060.jpg
    145.6 KB · Views: 30
  • 062.jpg
    062.jpg
    145.8 KB · Views: 35
To avoid these ads, REGISTER NOW!
Top Bottom