Air hose, what high flow fittings will work?

[spunger1]

Hey guys,

I have one of these air hoses "Speedaire 3/8" x 50 ft Hybrid Polymer Air Hose" which I believe has 1/4 npt fittings on each end. I am wanting to get fittings for my air tools & the air hose to accept 3/8 couplers (so more flow to my tools).

Will these work for this hose?

http://www.northerntool.com/shop/tools/product_200319829_200319829

http://www.northerntool.com/shop/tools/product_200323683_200323683

http://www.northerntool.com/shop/tools/product_200319825_200319825

They are all Milton V type fittings for 3/8 NPT. I'm thinking from reading the descriptions that means it wants a 3/8NPT (where mine is 1/4npt)

I am new to a lot of the ways pipe threads work other than I know to match them up. I am just wondering if those are the right. They list the hose diameter but nothing about the fittings other end.

Any help would be greatly appreciated. I only need fittings for my air ratchet, air impact, air hammer, and tire chuck to be high flow (I have blow guns and nail guns that are fine with the standard fittings that I have a collection of already)

 

[MoparTruck85]

If your hose has 1/4" npt ends you'll need these

http://www.northerntool.com/shop/tools/product_200323681_200323681

http://www.northerntool.com/shop/tools/product_200319823_200319823