To avoid these ads, REGISTER NOW!

Air hoses..What would you buy?

dlcwent

Member Emeritus
Joined
Feb 24, 2014
Messages
8,427
Location
coastal maine
Hey fellow GJ's I have to replace one of the hoses in my shop. I've always used rubber 3/8x50. Usually goodyear. What would you get. I don't do cheap.
 
To avoid these ads, REGISTER NOW!
OP
D

dlcwent

Member Emeritus
Joined
Feb 24, 2014
Messages
8,427
Location
coastal maine
My "help" didn't show up today. He gave me some bs excuse to get the day off. Anyway I'm waiting for parts.
 

Bobdog

Well-known member
Joined
Jul 24, 2013
Messages
1,190
Location
South Jersey
I need some new hose myself. Interested to see the replies.

Sent from my SCH-I535 using Tapatalk 2
 

countryroad82

Well-known member
Joined
Mar 18, 2011
Messages
3,447
Location
Kentucky
A couple years ago my local parts house gave me a deal on a Flexzilla hose to try and give a local review. I'm in love!! My only complaint is the ends have a heavy piece of plastic tubing that gets in the way. I worked mine down out of the way. I'm sure it's to help keep from damaging the fittings but I didn't like it, it makes the end too stiff for me. Before that I had had good luck with Goodyear and Dayco hoses.
 

TMcCay

Well-known member
Joined
Jun 5, 2011
Messages
1,063
Location
SW. Oklahoma
I've been wanting to hear if anyone has tried the new Goodyear F5 air hose. I haven't had the chance to see one yet. I can order it through Home Depot but would like to know how it compares to the Flexilla. I just bought a Goodyear Pliovic hose but I am cutting it to specific sizes for a tire changer and lift table the I just bought and did not want excess hose everywhere. It seems like a well made hose and flexible and for $15 for a 50 foot 3/8 hose seemed like a bargain to me. But it's not going to be dragged all over the place so I don't know how tough it will be.
 

schmelpboy

Banned
Joined
Jun 24, 2012
Messages
1,717
A couple years ago my local parts house gave me a deal on a Flexzilla hose to try and give a local review. I'm in love!! My only complaint is the ends have a heavy piece of plastic tubing that gets in the way. I worked mine down out of the way. I'm sure it's to help keep from damaging the fittings but I didn't like it, it makes the end too stiff for me. Before that I had had good luck with Goodyear and Dayco hoses.

Flexzilla also makes whips for your tools, that would eliminate that "stiffness" problem you have...
 

tlmartin84

Well-known member
Joined
Apr 23, 2012
Messages
1,085
Location
West Virginia
I just bought a 100' Goodyear Black hose made in the USA for 53.00 on ebay.

I will take it to my hydraulic guy and have good hydraulic ends put on it. The way they are crimped they don't wear the hose at the end like the stock crimps do.
 

tshetter

Well-known member
Joined
May 19, 2011
Messages
603
Location
Central, FL
I have a 50ft 1/2" FlexZilla hose in the shop and I really like it.

Very flexible, doesn't kink, seems to be built pretty well.

I think it might have been $25-$35 at Tractor Supply, but I don't exactly remember.
 

schmelpboy

Banned
Joined
Jun 24, 2012
Messages
1,717
Has anyone got a "Flexilla" hose? Are they any good?

Flexzilla is downright awesome. We used to replace hoses all the time because someone in the shop would park a heavy truck on one, splitting it, or weld with one underneath them and some slag would burn a hole in our old rubber hose. We would constantly be replacing or fixing our air hoses.
A couple of years ago, I decided to switch my personal hose to Flexzilla. Within a couple of weeks everyone was stealing it and using it. I've never had a problem. Not a single split or repair, and you can bet that the guys in the shop haven't changed their bad habits of parking on it or welding over it.
If the Flexzilla wasn't already awesome enough, they then came out with a hose in the last year that actually has a built in repair mechanism. If you do manage to put a hole in your hose, you can actually turn down a spring loaded type of cover that covers the hole. I believe it's got one on each end, giving you 2 repairs before you actually have to take it somewhere to have a third hole fixed. Pretty awesome.
They became such a hit in the shop that I replaced every single hose we have here with Flexzilla. Even all of our water hoses here, and all of mine at home are now Flexzilla. I even bought their pressure washer hose this winter (I haven't had a chance to use that one yet). I have nothing but good things to say.
It also doesn't hurt that I get to try their stuff out before it even hits the market since I know someone pretty high up at the company. There's all kinds of stuff in development that hasn't hit the shelves that is pretty awesome. Some of it never even makes it to the shelf.
A little trivia that no one cares about, but they actually made Flexzilla in a whole bunch of different colors. But, to make themselves obvious to consumers and not to let others build a similar knock-off hose, they decided against releasing any of the other colors and only use the neon green so that everyone knows it's a flexzilla. They actually had a whole array of colors that were going to be released, all of which had different names. For example the coolest one I saw was called the "Hot Dog" hose. It is literally the exact same color and look as a hot dog. I know this is way off topic, but just fun facts.
I should probably make a thread on here of upcoming stuff from the company, or take pics of stuff that has never and will never be released. It's some pretty cool stuff. I'll have to ask the guy if that's allowed per company rules or not. It'd make for some pretty interesting viewing.
Also, if anyone is buying any of those blue aluminum high flow ends/couplers/etc that are made by Legacy, I have about 5 of every coupler and about 40 of the high flow male, female, etc end for your air tools that I bought when re-tooling our shop that I'd sell a whole lot cheaper than the crazy prices Summit is asking for them...

http://www.summitracing.com/parts/lmc-a63440-x?seid=srese1&gclid=CPeL6Mqbwr4CFahaMgodojsAZA
 

schmelpboy

Banned
Joined
Jun 24, 2012
Messages
1,717
Also, pretty much everywhere I've seen Flexzilla air hose, it's 35 bucks for 50ft of 3/8. I think the ones with the built in hole repair are a bit more...

Also, I just realized that I have a brand new Levelwind reel from Flexzilla still brand new in the box if someone wants it. I also have one of those neon green all metal construction hose reels and hose that Grainger's sells for around 700 bucks brand new in the box, too. If I could find a link to it I'd post it. I'll get the model numbers tonight and probably post them to the classifieds.
 
Last edited:

tstaude

Well-known member
Joined
Mar 28, 2013
Messages
2,324
Location
SE Wisconsin
+1 on the Flexzilla
I have used their air hoses and garden hoses.
Check the web for best pricing

They also came out with a pressure washer hose, I am curious to see if anyone has used this yet. I am so sick of the hard plastic pressure washer hose.
 

Imcrazy

Well-known member
Joined
Feb 4, 2012
Messages
349
Location
N. Texas
A little trivia that no one cares about, but they actually made Flexzilla in a whole bunch of different colors. But, to make themselves obvious to consumers and not to let others build a similar knock-off hose, they decided against releasing any of the other colors and only use the neon green so that everyone knows it's a flexzilla. They actually had a whole array of colors that were going to be released, all of which had different names. For example the coolest one I saw was called the "Hot Dog" hose. It is literally the exact same color and look as a hot dog. I know this is way off topic, but just fun facts.

It's a shame about the colors. The only complaint I've every heard about the Flexzilla is that the green gets dirty fast and looks like ****. I have also heard folks talk about the UV getting to Flexzillas that get a lot of sun exposure.

Oh well maybe some day flexzilla will be in colors
 

schmelpboy

Banned
Joined
Jun 24, 2012
Messages
1,717
It's a shame about the colors. The only complaint I've every heard about the Flexzilla is that the green gets dirty fast and looks like ****. I have also heard folks talk about the UV getting to Flexzillas that get a lot of sun exposure.

Oh well maybe some day flexzilla will be in colors

I have no problems with them getting dirty, but all of my garden hose that is bright green turns a dull yellow within a week or so of being outside. I don't care about the color, just the function, though.

And, if you really want to talk about dirty, one of their color ideas was white. :) I should see if the guy will sell me some of the colors so I can post them on here.
 
Last edited:

RandyL

Well-known member
Joined
Feb 5, 2014
Messages
326
Location
Kansas
I'm up to 3 of the 50ft Flexvilla now.... I threw a good hose in the trash to make room for the third one....Totally sold on them.

Randy
 

ABADWILLYS

Well-known member
Joined
Nov 16, 2012
Messages
738
Location
Hudson Valley, NY
Long time Goodyear user here but we got Flexzillas at work about a year ago, and i have to say at first i didnt think theyd last, but actually theyve been a really good hose, and trust me i abuse my hose..wait.. nevermind.. umm, yeah, ide buy one for my home shop also.
 
To avoid these ads, REGISTER NOW!

Lone Star Blaze

Well-known member
Joined
Dec 29, 2009
Messages
1,224
Location
Oklahoma
Has anyone got a "Flexilla" hose? Are they any good?

Never used one we sell them at work and about 40% of them get returned but we have also had a handful of repeat customers on them. So I guess its one of those love or hate things. I personally use DeVilbliss good hose at about 75 cents a foot and about $7.50 for the ends
 
Last edited:

Spareparts

Well-known member
Joined
Mar 12, 2010
Messages
2,051
Location
Lansing Ks.
I got the 3/8" X 50' flexzilla and put it on my reel, the only thing I see with it is it swells up larger than any rubber hose I have ever had, kinda bulky. But in it's defence it is at 175psi. Got it at TSC for around $35.00.
 

machine_punk

Well-known member
Joined
May 14, 2011
Messages
2,540
Location
Napa Valley, California
+1 on Flexilla. I have a 12-footer I use as a whip hose (last hose before the tool). It gives me a lot of movement and is very light. Once it is pressurized, it won't kink. I've heard they stay flexible in the cold, but I'll never find out, in Napa Valley.

As I replace air hoses, Flexilla is definitely what I am going to buy.
 

Badger 13

Well-known member
Joined
Aug 28, 2010
Messages
407
Location
Northern Idaho
Another vote for Flexzilla. I have two 50 footers, and a couple of their whip hoses and have been very satisfied with them. As previously mentioned, the bright green will show some dirt.
 

Jetfixr320

Well-known member
Joined
Nov 21, 2013
Messages
184
I bought a Flexilla hose on Monday, used it for a paint job tuesday. Great hose, glad I bought it.
 

Ruger_556

Well-known member
Joined
Dec 8, 2013
Messages
4,005
I hate Flexzilla... Parker Push-lock for me. Soooo much nicer (Dark blue instead of rancid green, doesn't pickup grease and wipes off with a rag, etc...)
 

Nexussian

Well-known member
Joined
Mar 12, 2014
Messages
639
Location
Alaska
My favorite to date is the "natural rubber" Good Year hose that China Freight used to sell.

It's somewhat fragile compared to the Red Goodyear or the Parker Pushlock, but doesn't get stiff in the cold, at all.

Very flexible when warm too. :)
 

bobsjr

Member
Joined
May 10, 2014
Messages
9
Location
commerce city colo
i go to my local hose and hydraulic supply and have them made i get to choose the length i wand hose is good quality and ends are high quality was about 1.00 a foot last time i bought one but usually discount it for me
 

rodm1

Well-known member
Joined
Feb 17, 2008
Messages
2,275
Flexilla is definitely the best you can easily find I think others are out there. A second best is Goodyear I've always had good luck with them.
 

gregtwojeeps

Well-known member
Joined
Jul 30, 2013
Messages
5,096
Location
Ky
To avoid these ads, REGISTER NOW!
Top Bottom