Alex's Huge vintage tools thread

[alex71]

Here is some more new old stuff I picked up for you guys. Please note that prices do not include shipping or insurance. If you want postal insurance, please say so. I would appreciate it if you would post up here, then send me a PM if you're interested in something.

Everything is made in U.S.A. unless stated in the item description.

Offers always considered, as are trades. A list of stuff I'm looking for is linked in my sig.

Click on a thumbnail to display a hi-res 12mpix image.

Thorsen 3/8 drive ratchet. Excellent used. $15


Misc sockets, L to R
Indestro select 1/2 drive 3/4" 6pt. NOS. $SOLD
Indestro super 3/8 drive 3/4" deep 12pt. Used. $SOLD
SK-Wayne 1/2 drive 9/16 12pt EXTRA deep. NOS. $SOLD
PowrKraft 3/8 drive one-piece flat blade. NOS. $SOLD
Proto Pro 1/2 drive 5/16 hex bit impact. Used. $SOLD
Proto Pro 1/2 drive 5/16 hex bit impact. New (two avail). $10
Proto pro 3/8 drive 5/16 hex bit extra long. Excellent used. $SOLD


TrueCraft (SPAIN) 1/2" drive ratchet. NOS. $10


Snap-On strikeover socket. 1/2" drive 3/4" 4-point. Super good shape. $15


Martin 3/4 single open end wrench. New. (4 available). $7


Apex 3/8 drive 3/8 magnetic impact sockets. New. (6 avail) $5


Companion 6 piece screwdriver set, new in package. one left. $8

 

[sawatch]

I'll take Indestro Select Deep Offset Box Wrenches @ $25, PM sent, & Bonney Phillips No 4 @ $4

 

[webscrounger]

I'll take the two Husky and Hinsdale T bars. PM sent - I think.

 

[alex71]

I'll take the two Husky and Hinsdale T bars. PM sent - I think.

Sold to you webscrounger. Thank you.

I added a bunch of new items to the OP. Check them out.

 

[dustin19]

industro select extension dibs

 

[Bull]

Why do people keep calling that brand Industro?

Alex, what does the top side of the Powr Kraft ratchet look like? Can you tell? How long is it?

 

[alex71]

Why do people keep calling that brand Industro?

Alex, what does the top side of the Powr Kraft ratchet look like? Can you tell? How long is it?

I've added a picture for you in the original post. check it out.

 

[Hiball]

2nd on the indestro deep offset wrench set if something falls thru.

 

[dieseldodge01]

Can you guess what I want ;-)

Penncraft 1/4 drive. NOS $7
1/4" drive penncraft. $4
3/8 drive Penncraft. $5
3/8 drive JCPenney (bottom two). $3 each

PM Sent
I take'm all

 

[alex71]

Craftsman =V= stuff added to post #2.

 

[dustin19]

Why do people keep calling that brand Industro?

Alex, what does the top side of the Powr Kraft ratchet look like? Can you tell? How long is it?

cause i was typing to fast calling it before someone else... so didnt think about correct spelling

 

[Hoot]

PM sent on the two Craftsman 3/8 drive ratchets

 

[doug.j]

I'll take the:
martin 7/8" single open end wrench
craftsman =v= double box 8pt wrench
Craftsman =V= 6 pc 1/2" drive 8pt socket set

 

[alex71]

PMs returned

 

[BlindViper]

What are the sizes on those "big" wrenches in that draw pic on the right side?

 

[DragPack69]

If still available, I`ll take the 1/4 drive set.

John

 

[alex71]

If still available, I`ll take the 1/4 drive set.

John

the craftsman 1/4 drive set is yours if you want it. sending you a PM.

 

[nissan_crawler]

How much for the ford (monkey) wrench, and the thinwall wrench set (if that is a set)? Also, any chance you have a 15/16" craftsman wrench for sale?

Also, third in line for the indestro wrenches.

 

[jpilgrim]

Next in line for the 8-point dbl box shallow offset.

 

[alex71]

PM sent on the two Craftsman 3/8 drive ratchets

Both ratchets sold to Hoot. Thank you.

 

[alex71]

I'll take the:
martin 7/8" single open end wrench
craftsman =v= double box 8pt wrench
Craftsman =V= 6 pc 1/2" drive 8pt socket set

Martin 7/8 and all the Craftsman 8pt stuff sold to doug.j. Thanks!

 

[alex71]

I'll take Indestro Select Deep Offset Box Wrenches @ $25, PM sent, & Bonney Phillips No 4 @ $4

Indestro wrenches and Bonney screwdriver sold to sawatch. Thanks!

 

[alex71]

What are the sizes on those "big" wrenches in that draw pic on the right side?

herbrand single open end 1-3/8
martin 32mm check nut
martin single open end 1-7/16
williams single open end 1-1/16
williams superrench double open end 1-1/8 1-1/4
and three bonney bonalloy double open end, the largest one being 1 1-1/8

 

[prsmd]

Interested in the Craftsman v:
1/4 socket set
6"extension
12pt 3/8 set w tray
prsmd

 

[alex71]

Interested in the Craftsman v:
1/4 socket set
6"extension
12pt 3/8 set w tray
prsmd

These items sold to you prsmd. Thanks!

Four pieces of Craftsman =V= sweetness still available.

 

[alex71]

Indestro extension available again.

 

[Crashman]

I'll take the following if still available:
SK 3/8 breaker bar $10
Thorsen 1/4 breaker bar $8
Crescent 8" adjustable (if USA made) $8
Sears plier set $12
Proto 10" adjustable $7

 

[stevejh82]

Got the ratcheting wrenches today, they look great, thanks,

Steve

 

[alex71]

I'll take the following if still available:
SK 3/8 breaker bar $10
Thorsen 1/4 breaker bar $8
Crescent 8" adjustable (if USA made) $8
Sears plier set $12
Proto 10" adjustable $7

These items sold to Crashman. Thanks! I will edit the OP later tonight.

 

[Hoot]

Alex,
Received the two Craftsman ratchets today. I have to say, they are a LOT better than your pictures showed. Both actions are crisp and firm. The V-selector version is basically brand new! I didn't see any nicks and only a couple of light scratches around the selector. And the finish overall is absolutely amazing for the age. The few pieces of information I've found show the V-selector was early-mid 60's??? This one looks like it's been sitting on a shelf since it was made. I don't know where you find this stuff, but you're good at what you do.

Consider me a very happy customer, and thanks again for offering this stuff to the forum members.

Houston

 

[toolmutt]

Received the 1/4" drive SK sockets today. Now that set is complete! Thanks Alex. Great transaction. Hope to deal again someday.

 

[Jack90210]

Sending PM re:

PowrKraft 1-13/16 12pt. (One left) $6

SK 1-5/8 12pt. $6

Proto 1-5/16 impact 6pt. $6

SK 1-1/8 12pt. $4

 

[doug.j]

Received my tools today. I've forgotten how nice Craftsman tools once were. Thanks for posting them for sale here and not feebay.

 

[alex71]

Thanks guys. Still lots of good stuff left here. See posts 1 & 2.

 

[prsmd]

Received the tools.
Thanks
Alex

 

[alex71]

I had a few things marked as pending, but over two weeks later the money order hasn't shown up, and the member doesn't respond to PMs (even though he has been on the site every day since then)....so they are back for sale. Have a look.

 

[jpilgrim]

I'll take the PowrKraft 1/4" drive socket set. Sockets are the following sizes: 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16. Excellent used condition. $8

 

[alex71]

bump. everything is OBO.

 

[commonut]

PM sent for C man 3/8 breakers, Oxwall ignition set, and Apex 1/2" drive to 3/4" drive adapter (increaser).

 

[ksfarmboy]

PM sent on Craftsman offset wrenches and Herbrand ratchet.