Aluminum pegboard install question (s)

[PDoyle]

I'm installing 15 feet of aluminum pegboard and need to cut for light switches.
I have a 3/4" gap to the wall. Anybody have this situation? I want to either bring the switch to meet the pegboard or cover the opening up on the pegboard so I don't bleed...
Any ideas?
Thanks.

 

[Doug19]

Get an outlet box extender to bring it out to the pegboard.

 

[WAPat]

You need something like this, it will allow you to get the switch flush with the pegboard.

http://www.amazon.com/s/ref=nb_sb_n...rch-alias=aps&field-keywords=1+gang+extension

 

[PDoyle]

Get an outlet box extender to bring it out to the pegboard.

Excellent thank you.

 

[PDoyle]

You need something like this, it will allow you to get the switch flush with the pegboard.

http://www.amazon.com/s/ref=nb_sb_n...rch-alias=aps&field-keywords=1+gang+extension

Thanks for the reply, talked to a contractor who showed me these small black plastic pieces about 1"w x1 1/2"L that have holes for the top and bottom screws holding the plate and can be bent in place to extend the plate out to meet the pegboard.
An easy fix.