RestroomCritic
Member
- Joined
- Aug 29, 2024
- Messages
- 7
Edit: Wrong thread
Last edited:
Amazon Deals on New Retail Items - Post them!
- Thread starter vwpieces
- Start date
Muffduster
Well-known member
Wrong thread.
TheRealBastard
Well-known member
- Joined
- May 5, 2024
- Messages
- 257
Got the 'stabilizers'. Well packed and nicely die cast. I would not trust the load rating on them as they are very light weight. I bought them to prop up some sagging roof temporarily so they'll be fine for that. Makes for a very light jack around the house too.
Last edited:
nicks78camaro
Well-known member
DEWALT DCF911B 20V MAX* 1/2" Impact Wrench with Hog Ring Anvil (Tool Only) $126.90
https://www.amazon.com/dp/B09HVXKJF6?tag=atomicindus08-20
https://www.amazon.com/dp/B09HVXKJF6?tag=atomicindus08-20
edit: order the 1st item, only one caster received in bubble wrap, avoid.
Last edited:
PlantItDeep
Well-known member
- Joined
- Jun 16, 2021
- Messages
- 368
Dewalt 7/16 inch impact socket (3/8 drive)
$3.85
not a bad price if you need a single socket
$3.85
not a bad price if you need a single socket
chipdog4
Well-known member
Someone posted these plasma cutters before. Now they’re half off.
$100 for a plasma cutter
https://www.amazon.com/gp/aw/d/B0B5ZX5T22/?tag=atomicindus08-20
$100 for a plasma cutter
https://www.amazon.com/gp/aw/d/B0B5ZX5T22/?tag=atomicindus08-20
goblue1998
Well-known member
I have that plasma cutter. I’ve not used it much but it worked great. I think I paid about $175.
Thanks for sharing! Didn’t get that model, but got one for a CNC plasma table.
Dead Blow Hammer
"Made in USA" is embossed on the handle.
The specifications from the Gearwrench website are a bit contradictory.
69-543g-15-oz-one-piece-slimline-dead-blow-hammer
"Made in USA" is embossed on the handle.
The specifications from the Gearwrench website are a bit contradictory.
69-543g-15-oz-one-piece-slimline-dead-blow-hammer
Last edited:
That didn't last. Higher now $34.76Dead Blow Hammer
"Made in USA" is embossed on the handle.
The specifications from the Gearwrench website are a bit contradictory.
69-543g-15-oz-one-piece-slimline-dead-blow-hammer
Muffduster
Well-known member
Ordered me the $99 one with pilot arc. Thanks!
TheRealBastard
Well-known member
- Joined
- May 5, 2024
- Messages
- 257
Bought 2 sets of this 38 piece Apex bit set for $10.99. Sold by Aventis Systems. Seems like a great price. They arrived and look perfect. I like the case also.
Tool Multi-Tool Industrial 38Pc Fastening Set https://www.amazon.com/dp/B07WW6XPVQ?tag=atomicindus08-20
They are also selling another type at the same price.
Apex AUGSET-38 Chain https://www.amazon.com/dp/B07TFLCPQR?tag=atomicindus08-20
Tool Multi-Tool Industrial 38Pc Fastening Set https://www.amazon.com/dp/B07WW6XPVQ?tag=atomicindus08-20
They are also selling another type at the same price.
Apex AUGSET-38 Chain https://www.amazon.com/dp/B07TFLCPQR?tag=atomicindus08-20
Muffduster
Well-known member
That knurling is the absolute pits. Scars up working surfaces, gets burrs in the knurling, and causes embedded metal shards in your skin. ****!
open box vevor's only a few bux more so maybe not worth it (pump looks smaller?)
edit: order the 1st item, only one caster received in bubble wrap, avoid.edit: order the 1st item, only one caster received in bubble wrap, avoid.
Cue
Well-known member
I ordered and got all 4 wheels
TheRealBastard
Well-known member
- Joined
- May 5, 2024
- Messages
- 257
TheRealBastard
Well-known member
- Joined
- May 5, 2024
- Messages
- 257
PugetDude
ALLIANCE MEMBER
I ordered a set of 4" and a set of 2".
Thanks for the link.
Thanks for the link.
I've been looking for 'vevor', price range 0-15$ periodically. Lots of decent shix pops up. They should send stickers
If anyone cares, this is the best price I've found on these retractable & dismountable ones. You can pull the casters out and avoid the jutting out from these types and buy extra mounting plates for other tables/equipment w/o needing to buy more casters. Reviews say the instructions are wrong so just use your nogging:
darrowco
Well-known member
Got a set, thanks! 
Cheapest plates I've found (check dimensions as I haven't):Got a set, thanks!
darrowco
Well-known member
For mixing and matching, it looks like the PowerTec plates are the closest match, outside dimensions about 1/16" - 1/8" larger than the plates that come in the Dozawa caster/plate kit. It looks like they should work.
More PowerTec info:
71132 - Plates only
17000 - Poly Wheel Casters only
17001 - Poly Wheel Casters only, Multi-Mount
17002 - Poly Wheel Casters with Plates
More PowerTec info:
71132 - Plates only
17000 - Poly Wheel Casters only
17001 - Poly Wheel Casters only, Multi-Mount
17002 - Poly Wheel Casters with Plates
TheRealBastard
Well-known member
- Joined
- May 5, 2024
- Messages
- 257
I'm partial to the spring loaded ones (no pin to lose) but I don't own any to check against.
Amazon is up to $14.98 now but Home Depot has the Klein 32500 for $11.98 with free shipping. Have to put it in cart to see price and with dynamic pricing it could change.
Old Man Roger
Well-known member
Got my new iPad today.If you need a new tablet, the 9th gen iPads are $199 down from $340, as Apple recently dropped the 10th gen. So they're clearing out the 9th gen units. It should be supported for 3-4 more years.
It is the last one with a Home button and a speaker port. It also sports lightning port (I have a lot of them since I have an iPhone 12).
I am blown away by the screen quality. Way way better than my Amazon Fire 7 inch.
Criss
ALLIANCE MEMBER
It's $14.97 now at Home Depot. Bummer
