thanks entered that code under promo and $21.19 to my door.Bought this a couple months ago and it works for my infrequent pruning needs. Takes Makita batteries, or the ones supplied. Manual oiling required with a supplied squeeze bottle. Coupon W5ZY4ILA expires today, that gives it to you for $22. Buy more then one if you trust your friends with a chain saw.
Amazon Deals on New Retail Items - Post them!
- Thread starter vwpieces
- Start date
My wife has one of these label makers. Shes uses it constantly.No idea if this works, because I haven’t received mine yet, but if you are a prime member, and use coupon code ESFABBNG, it’s $10 to your door.
me
The chainsaw is still working, but the $10 label printer isn’t. They probably caught on to the double dipping on the discounted price and the coupon on the label printer. $17 for the printer is probably still a good deal if it works.
The printer still works for me
Maybe it’s only letting me buy one. I bought two more chainsaws.
TheRealBastard
Well-known member
- Joined
- May 5, 2024
- Messages
- 257
TheRealBastard
Well-known member
- Joined
- May 5, 2024
- Messages
- 257
MichaelP
Well-known member
You'll have to add cost of subscription to add hidden options (more than one font, etc.). Bait and switch.
No idea if this works, because I haven’t received mine yet, but if you are a prime member, and use coupon code ESFABBNG, it’s $10 to your door.
TheRealBastard
Well-known member
- Joined
- May 5, 2024
- Messages
- 257
No idea if this works, because I haven’t received mine yet, but if you are a prime member, and use coupon code ESFABBNG, it’s $10 to your door.
I've been wanting a shrink tube label maker w/rechargeable battery and I think the combo below will work for me (will confirm when it gets here; I'm unsure about the tape):
TheRealBastard
Well-known member
- Joined
- May 5, 2024
- Messages
- 257
That price was changed quickly.
pcrov
Well-known member
Probably sold one. It'll come back down in a day or two, then climb further down again from there.That price was changed quickly.
I've been wanting a shrink tube label maker w/rechargeable battery and I think the combo below will work for me (will confirm when it gets here; I'm unsure about the tape):
Do these off-brand label makers use standard refills (Brother, etc.), or do they require unique ones?
Mike
The one I picked uses a Dymo clone or Dymo branded. There was another I was looking at but it looked like the cartridge was proprietary so I skipped.
to complete the set:
edit: the one below dropped further in price + coupon.
Attachments
Last edited:
Steel_Rain
Well-known member
- Joined
- Apr 23, 2024
- Messages
- 1,363
Not a bad deal on a 3-pack of GEARWRENCH ratchets:
I like the comfort grip handles more, but these are good for the money with a lifetime warranty.
I like the comfort grip handles more, but these are good for the money with a lifetime warranty.
CZ Eddie
Well-known member
Best price since 2023. It's been $139 for awhile.
Amazon.com: OTC 4579 9-Way Slide Hammer Puller Set , Black : Automotive
Buy OTC 4579 9-Way Slide Hammer Puller Set , Black: Puller Sets - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
CZ Eddie
Well-known member
Cheapest price all year. Tied for all-time. Usual price is $39.
This was recommended by someone on the board recently but I can't remember who?
I put it my cart when they talked about it.
This was recommended by someone on the board recently but I can't remember who?
I put it my cart when they talked about it.
Fly Fishing Rick
Well-known member
30% off with coupon. I was looking for a replacement tape after my old one started to split at one of the blade rivets. I almost went with my trusty tried and true Fatmax but love Klein tools and decided to try something new since the 30% coupon knocks it down to around the same price as the Stanly. Not sure if it's just a random sale, Prime days related, or due to the fact that Klein is being sued my Milwaukee over this tape measure, and a few others just like it.
https://www.amazon.com/dp/B07WF9TKNN?tag=atomicindus08-20
https://www.amazon.com/dp/B07WF9TKNN?tag=atomicindus08-20
Lot of focus recently on the Harbor Freight Icon magnetic mat, but they recently raised the price to $25. Took a chance on this set vs waiting for the HF to be in stock/on sale. They also have the large mat + telescoping magnet for $21.24.
2manytools
Well-known member
Lot of focus recently on the Harbor Freight Icon magnetic mat, but they recently raised the price to $25. Took a chance on this set vs waiting for the HF to be in stock/on sale. They also have the large mat + telescoping magnet for $21.24.
You might want to check this one out. https://www.instagram.com/reel/DN8sonSCeBy/
I've definitely seen some of these mats where the magnets are spread out, and looking at the Sunex on Amazon, it appears it's only got 12 magnets spread throughout the surface with large gaps. The Icon mat doesn't seem to have that issue, and I've got a few from Eastwood that look like a similar (identical?) magnet layout to the Icon: https://www.eastwood.com/eastwood-magnetic-work-pad.html. You can see in that photo that there are lot of magnets in two sizes providing good coverage.
The Shall mat is obviously different than Icon/Eastwood (square magnets vs round), so I'll have to see how it compares. Unfortunately I won't know for a bit over a week as I chose no-rush delivery.
landstuhltaylor
Active member
- Joined
- Jan 26, 2015
- Messages
- 27
Now that I have a lift and two cars that need transmissions pulled soon, it was time to add a trans jack. These things are a lot more expensive than they used to be but today was a good day to buy it. Sunex 7796 air/hydraulic unit for $890. Everyone else is a higher price and charges for freight.
Best price since 2023. It's been $139 for awhile.
Amazon.com: OTC 4579 9-Way Slide Hammer Puller Set , Black : Automotive
Buy OTC 4579 9-Way Slide Hammer Puller Set , Black: Puller Sets - Amazon.com ✓ FREE DELIVERY possible on eligible purchaseswww.amazon.com
This is BS. I just order this and it showed prime delivery of tommorow, same as it shows in this pic. My order goes through and now its gaureented delivery date of thursday Oct 9. Its not a big deal, but its bait and switch. I seen it and added it on to fullfill another item i needed tomorrorow morning to make a $35.00 overnight deal. Now neither are coming until thursday. I dont get it. It may be a deal but i may cancel both items now,
Digital4n6
Well-known member
Thanks! Code didn't work for me and instead I got the "upgraded" D11 model (USB C, 300 dpi instead of 203 dpi) with 3 tapes for $34. https://www.amazon.com/gp/product/B0DT92JMJR/?tag=atomicindus08-20
Well get this, I cancelled my order. I'll pay the extra $20 when and if i need it. They told me they must have sold so many they can't ship them on time. It does now however say prime two day if you look at the add, BUT the piece I really needed and had to order more items, so the bill comes up to $35 to get next day delivery is now showing Prime tommorow delivery without adding anything else. It seems to me that $35.00 is just a come on upcharge attempt like a drive thru burger joint. Wouldn't be bad if you were not already paying to be a prime member.
CZ Eddie
Well-known member
I don't know if it matters, but OTC offers a lot of standalone attachments for their slide hammer.
They might fit the HF one too, IDK. I couldn't find the thread size for HF.
But the OTC is 5/8"-18 thread.
SkinnyG
Well-known member
nicks78camaro
Well-known member
What's crazy is they won't do a price adjustment within a reasonable time frame, but they'll pay to ship it back and ship you another one free at the lower price
chipdog4
Well-known member
This is $24.49 with a $7.35 coupon now bringing it to $17.14
https://www.amazon.com/gp/aw/d/B007IQ539C/?tag=atomicindus08-20
Generic, Chinese 5 piece tie rod and ball joint puller kit
$25 plus 25% off. Price has been falling rapidly.
BobsYourUncle69
Well-known member
Some of the Gedore red stuff is pretty bad , like the 24 pc combination wrench set made in India, it look like it skipped quality control and I really should have returned that set, but I didn't, they could have charged a bit more for the set and rather made it in Taiwan.
The Gedore red sockets I've bought to fill in the gaps in my D19 set aren't awful , their fit and finish is miles better than Husky , Pittsburgh etc for around the same money( paid $24 for a 1/4 metic socket set off amazon, the ratchet is pretty decent as are the sockets )
I bought 2 of those Chisel sets too , I bought " used like new " and paid I think $12 a set, for the price , I'm happy with them. I'm really not a fan of Gedore red as it can be very hit/miss depending on the product but this hammer and chisel set got the job done.
Gedore is my go to for many things , but when buying Gedore red , I make sure it's through a place that offers hassle free returns , but I often end up choosing something else before I buy Gedore red unless it's priced very well.
Last edited:
I've thought about buying that, but it gets a lot of negative reviews for product quality.
I didn't see any complaints about OTC's tool product quality. There was a complaint about the case breaking, and someone received an obviously used kit, but nothing about the parts breaking, screw stripping, etc. unlke the HF version.
Mike
