To avoid these ads, REGISTER NOW!

Amazon Warehouse Deals

To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!

Cruzan80

Well-known member
Joined
Jul 22, 2015
Messages
4,201
Location
Denver, CO
I got the same version in a past AWS deal, also "acceptable". Not much of a box, but the inside looked like it had never been used. PF showed it outputting stupid high numbers, they just didn't like the F/R switch. I never installed the clip-on part of the switch (what they were worried about breaking), as the female half has enough sticking out to flick with your finger.
 

jayemm

Well-known member
Joined
Dec 18, 2018
Messages
1,524
Location
up high down low
I remember years ago when that set cost just over $100 ($115?) at my local hardware store who carried S-K. Instead I bought the 13 pc "professional" raised panel, rough finish set because the thicker beam felt more comfortable and less slippery. Paid $75 IIRC.
 

Crabman

Well-known member
Joined
Dec 17, 2017
Messages
3,838
Location
Alexandria, VA/Dameron, MD
Don't want to bog down the deal thread.

I got an SK adjustable wrench that said made in USA on Amazon in August. It did not say USA on the handle. I think it possible that the new owners of SK have not adjusted the language on COO in the SK store on Amazon, or at least not thoroughly. Just a thought.


The product page shows USA and also the USA on the handle.
 

jayemm

Well-known member
Joined
Dec 18, 2018
Messages
1,524
Location
up high down low
Those have been on warehouse for months. Either there's something wrong with them, and they keep getting returned, or else someone just hasn't pulled the trigger.
Maybe at $301.44 people don't want to pull the trigger. Whether S-K, USA or whatever, still seems a bit too stiff.
 

gpiggaz

Well-known member
Joined
Mar 14, 2010
Messages
2,552
Location
Tucson, AZ & Edmonds, WA

Etchase

Well-known member
Joined
Nov 10, 2017
Messages
1,997
Location
Hawaii
Of course YMMV, but this seemed like a good buy for $138.73. So I ordered it, There is at least one more at that price remaining as of 10:30AM 9/26/24 Figured I could send it back if it ***** If it's good, I'll use it with my drill press to improve accuracy of hole placement ( wont' be using it to make my drill press a mill, far too dangerous!)



I took one of them. Still one left.
 

PugetDude

ALLIANCE MEMBER
Joined
Mar 13, 2013
Messages
22,373
Location
Superstition Mountains, AZ

gpiggaz

Well-known member
Joined
Mar 14, 2010
Messages
2,552
Location
Tucson, AZ & Edmonds, WA
Of course YMMV, but this seemed like a good buy for $138.73. So I ordered it, There is at least one more at that price remaining as of 10:30AM 9/26/24 Figured I could send it back if it ***** If it's good, I'll use it with my drill press to improve accuracy of hole placement ( wont' be using it to make my drill press a mill, far too dangerous!)

Came today- It was re-boxed, but otherwise in good shape.
 
To avoid these ads, REGISTER NOW!
Top Bottom