And it begans, 55'X40'

[GLTHFJ60]

Love the shop!! It went up fast!

 

[wickdgt]

Love the shop!! It went up fast!

Well kind of, but it took them from June to end of Sept, beginning of October.

Edgar

 

[wickdgt]

Got my toys in the shop, lift will be here this Wednesday the 16th November.

 

[1/2 Cup]

wickdgt, looking awesome .You should be pretty proud of the out come..

Regards

 

[wickdgt]

Thanks

 

[matt_i]

Great build, how long until the vehicle lift goes in?

 

[NUTTSGT]

Nice looking '86.

 

[M-technik-3]

Nice looking RX7, that's a 12a correct?

 

[wickdgt]

The lift is going to get to the hub on wednesday. The mazda is a turbo 12a runs 10.80s at 129mph in the 1/4 mile. Sleeper!!. Pirted, bridge pinned, 76mm turbo michrotech etc, etc. Lol.

 

[wickdgt]

Nice looking '86.

Thanks.

 

[M-technik-3]

Sure is a sleeper not sure how your running those numbers with such small tires unless that's just street ones.

 

[wickdgt]

Sure is a sleeper not sure how your running those numbers with such small tires unless that's just street ones.

Not with those tires, i have a set of 26x8 quick time pros. Rear end us a 9" with 4:86 gears, turbo ii ****** etc.

 

[mach1mustangman]

Wow! That is a super nice shop. I love the layout too.

 

[wickdgt]

Wow! That is a super nice shop. I love the layout too.

Thank you.

 

[Jango]

SO much envy for this garage.

 

[bcoke]

Love the floor may I ask what the difference in price from that first estimate????

 

[rattle_snake]

Nice build should feel good to be able to move your stuff in.

 

[sean Buick 76]

Well done and good taste in vehicles, I am impressed!

 

[wickdgt]

Love the floor may I ask what the difference in price from that first estimate????

$4,350.00 total cost included is the office and bathroom. From $13,400.00 first quote.

 

[wickdgt]

Picked up the lift yesterday, it will be install on the 28th of November. Can't wait. Is a D-10-ACX DANNMAR BRIGADIER 10K 2 POST.

 

[zmotorsports]

Very nice looking shop, both inside and out.

Mike.

 

[wickdgt]

I'm still moving things in the shop. Finish my bench, installed shelves and lift is in place etc. Waiting on some banners from some sponsors to get the shop more decorated etc.

Edgar

 

[BUGTHUG]

Very nice shop! I was wondering about the OSB walls. Did they use sheetrock mud and tape on the seams and the screw heads?
What kind of floor paint did they use?

 

[wickdgt]

Very nice shop! I was wondering about the OSB walls. Did they use sheetrock mud and tape on the seams and the screw heads?
What kind of floor paint did they use?

Nope, I just wanted the OSB, painted and move on. No mud on the seam or screws. Just nail them on go, LOL. The company I use for the floor they use some type of industrial paint and epoxy. They did a great job on it.


Edgar

 

[BUGTHUG]

Edgar,
floor looks great, gives it an elegant look. Almost to pretty to drive on! Did they put a silica (sand) mix in the paint so its not so slick?

 

[BUGTHUG]

Did you have a plan in mind where all your stuff would go? That's the biggest problem I have is trying to layout something that looks cool and also useable. I seem to keep buying **** off of CL and then I have to move stuff around to accommodate it.
If you don't mind me asking, cause GJ'ers like to know, what do you do for a living? I would say as nice as everything is, and in place, you must be a Dr.?
Oh and you must update that sound system

 

[wickdgt]

Did you have a plan in mind where all your stuff would go? That's the biggest problem I have is trying to layout something that looks cool and also useable. I seem to keep buying **** off of CL and then I have to move stuff around to accommodate it.
If you don't mind me asking, cause GJ'ers like to know, what do you do for a living? I would say as nice as everything is, and in place, you must be a Dr.?
Oh and you must update that sound system

The flor after painted he fou it. Is taking the darker color gray use a very thick paint roller that is not smooth, is really fluffy then puts in the paint them just went up and down, on the floor like a sponge and took the slick slippery off, which is great so now I don't slip. I have put all my stuff in those storage bucket you see on the rack beside the truck. What do I do for a living? I'm a retired military and work for the civil service. Not the greates pay. My wife and I have save for years and then when the time was right then we started the shop construction. If I was a Doctor you think Would of done it this size? It would of been 100'x100', lol.

 

[BUGTHUG]

Well sir ,thanks for your service! Must be why its so organized! I hear ya on the 100' X 100', even that would be filled shortly.

 

[hotrodchevy1999]

nice garage

 

[wickdgt]

Moved more stuff in. Built some shelf's and my new bench etc. Play with the trailer getting it inside the shop, it cleared nice and fit nicely.