To avoid these ads, REGISTER NOW!

Angle indicator recommendations?

To avoid these ads, REGISTER NOW!

larry_g

Well-known member
Joined
Apr 28, 2007
Messages
16,906
Location
oregon
What's your budget and accuracy requirements? Resolution? Calibrated or resettable? There are a whole lot of instruments out there that could do the job but your requirements will dictate what one will suit your needs best.

lg
no neat sig line
 

RTM

Well-known member
Joined
May 13, 2019
Messages
13,336
Location
SF Bay Area
I have the Tilt Box (not sure if 1 or 2), which seemed to be the starting point for all the others. Gift from a friend, hardly ever use it. Powered it back up a few weeks ago after several years in storage, with the battery out, still worked fine.

My biggest beef is it's so dang big. For KISS stuff, it's ok, but I'm often trying to measure some small internal angle where that thing won't come close to fitting in any direction. But none are digital.

So I buy every protractor type tool I find, and they come out much more often than the tilt box.
 
To avoid these ads, REGISTER NOW!

L.Cheapo

Well-known member
Joined
Oct 23, 2014
Messages
6,057
I have a Wixey WR300. It's highly rated and reasonably priced, but wasn't accurate enough for me for leveling. It would read level, then rotate it 90* or 180* and it would read .1* or .2* differently. That may be good enough for most people, but I went back to using a Starrett level.
 

Dave455

Well-known member
Joined
Mar 19, 2013
Messages
5,839
Location
Sussex, England
Does it have to be digital?

Generally speaking, if I have a choice of digital or not, the latter usually turns out to be the longer lasting instrument.

There is a Japanese company called Ebisu (famous for making these, very practical, transparent levels).
IMG_3558.jpeg

They offer a very simple (and inexpensive) inclinometer, if you don’t need it too accurate.
IMG_3560.jpeg

But if you want something a notch up, they offer that too!
IMG_3561.jpeg

If you want something really nice, Shinwa (also Japan) offer these -
IMG_3557.jpeg
 

YesIHaveAHammer

Well-known member
Joined
Jun 1, 2025
Messages
939
Would be nice to have something that clips or attaches someway onto a spirit level, rather than needing to be taped on.

Best perhaps would be a level design with a hole in which a compatible angle finder can be slotted in. I'm sure level manufacturers would rather I buy 4 separate digital levels though, but in reality it means I'm not buying any and instead supplementing with an angle finder.
 
To avoid these ads, REGISTER NOW!
Top Bottom