Another air compressor thread

[Rideit]

Hi folks,

After hours of reading, I still don't know which compressor to get. I live in a small island at Portugal and can't find anyone here to guide me.

I need it for die grinders, angle grinders, impact guns, sand blaster cabinet so, fairly high CFM. The problem is I'm limited to 230v (single phase) and a budget of 1500USD. I prefer a vertical compressor.

With this specs I selected two european brands - FINI and ABAC.

For 230v, the strongest pumps they have are ~350-400liter/min or 12-14CFM.

I have two options for ~1500USD:
1) Connect 2x FINI MK-103-90V-3M, single-stage belt motor 2200w with 3Hp, 90liters (24gal), which will result on 180liters (48gal), 26CFM and will cost 1500USD

Compressore Fini MK 103-90V-3M - in vendita su Macchinato

Acquista su Macchinato Compressore Fini MK 103-90V-3M al miglior prezzo sul web. Sconti e offerte sempre attive. Approfittane subito!

www.macchinato.com

2) 1x ABAC PRO A39B 150 VM3, two-stage belt motor 2200W with 3HP, 150liters (40gal), 14CFM

Compressore Abac PRO A39B 150 VM3 + MAC - PLUS - in vendita su Macchinato

Acquista su Macchinato Compressore Abac PRO A39B 150 VM3 + MAC - PLUS - al miglior prezzo sul web. Sconti e offerte sempre attive. Approfittane subito!

www.macchinato.com

None is the perfect solution, but it's the best I can get wit 230v. Which one is the best?

Other advise welcome too.

Nuno

 

[American Locomotive]

I don't think the ABAC compressor is much higher quality than the Fini compressor. I think the two Fini compressors connected together would probably do what you want.

 

[Jagmandave]

Do you have enough current (amperage) to support both motors running at the same time?

 

[Rideit]

I have access to 10,35kVA (45amps), that's not a problem.