To avoid these ads, REGISTER NOW!

Another asphalt question--resurfacing

mcj115

Well-known member
Joined
Dec 4, 2018
Messages
297
Location
Hershey PA
I see there a thread on installing/paving new driveways...I have a drive I want to resurface and not rip out what is there. The drive is from 1978 and is just weathered, cracked (but not loose) and just worn. The plus is the base of the drive seems solid, rather than rip out the what is there I want to resurface.

How thick of a top coat for the resurfacing should I be looking for? Are there any other products, such as fabric that are good to have a contractor use?

Thanks in advance.
 
To avoid these ads, REGISTER NOW!

Bondo

Well-known member
Joined
Dec 22, 2007
Messages
2,550
Location
Greenfield, Maine
How thick of a top coat for the resurfacing should I be looking for? Are there any other products, such as fabric that are good to have a contractor use?

Ayuh,...... An inch, to 2", so long as the pitch is maintained,.......

Fabric between asphalt layers rarely to never works very well,.....
Fabric works best when between the native soil, 'n the stone base,.....
 

malibu101

Well-known member
Joined
Jul 1, 2005
Messages
3,909
Location
Walnutport PA
I ain't not no asphalt expert nor is what I've seen necessarily correct......
Our parking lot at work was old and pretty much a mess from cuts for pipes and valve replacements including some potholes but seemed overall like a structurally sound base. They cleaned the old surface and sprayed some kind of hot tar on it as the spreader progressed.
Two years ago a company put 2" over the entire lot. Looks perfect and box trucks run over it daily.

EDIT- 2" compacted thickness.
 
Last edited:
To avoid these ads, REGISTER NOW!

jonshonda

Well-known member
Joined
Jul 17, 2017
Messages
4,749
Location
Wisconsin
The city/county extends the life of roads around me by chip sealing asphalt roads. You might want to look into that.
 

gahrajmahal

Well-known member
Joined
Dec 12, 2008
Messages
2,551
Location
Cincinnati, Ohio
Hi MCJ, attached is my thread of a few years ago on the same subject. Our driveway depth for the replacement was 6". I had to get a permit for the apron area of the driveway. It has to be thick enough for the county salt trucks to turn around without causing damage to the driveway. That was the first time the contractor had ever heard about this despite working in the area many years. The permit was free and easy. We love our new driveway (now 3 years old).

Photos of your driveway will help the GJ responders

Good luck!
https://www.garagejournal.com/forum/showthread.php?t=328586
 
To avoid these ads, REGISTER NOW!
Top Bottom