Another Tekton Protype MTR4 Tool Roll

[Fedwrench]

I saw this new prototype tool roll when looking for new products at Tekton.com today.

MTR4 Tool Roll, Ranger Green (Prototype) | TEKTON | Made in USA

Prototype release: a 18 x 28.5 inch mobile tool roll made from 1000D nylon. Made in the USA. EXP00012.

www.tekton.com

They're sold out which prevents me from buying one.
They only made 25 in each color.

Reminds me of the Yorktown tool roll:

Atlas 46 Products - Tool Vests, Bags, Belts, and More

Made in the USA tool belts, vests, and bags for heavy industrial use.

www.atlas46.com

What say you? Is Tekton crazy for making a US made tool roll? or would you rather see prototype tools?

Personally, I feel those Atlas 46 peeps have the tactical tool roll covered but, I guess there's always room for more choices.

 

[four.cycle]

^

I saw this new prototype tool roll when looking for new products at Tekton.com today.

$180.00

I believe I paid less than $20 bucks for this green nylon roll-up, which looks very similar to that one.
This one is China (PRC) made, and the overall dimensions are about 13" x 19", so it is considerably smaller than the Tekton unit.
The pockets on this unit are NOT long enough for an Indestro 15/16" x 1" double-end box wrench, and certainly not long enough for my Martin 17-inch breaker, or the small small socket/bit set in the center of the image. (Still waiting on Tekton's update on the "Small Engine Kit" to replace it.)

What I wanted was something that would fit behind the seat of my standard cab Ranger. This one won't fit once it's loaded and rolled up, so I know for sure the Tekton model wouldn't fit either. This rides in a cardboard box on the passenger side floor pan for longer trips (along with a mess of other "emergency repair" items (gloves, duct tape, flashlight, etc.)

 

[WhataTool]

Tekton vying to be the next VIM

 

[AJHD]

Cool bag, but with the asking price it might as well not exist. Hard pass.

 

[KnurledNut]

Heck yeah. More mobile solutions are always good. I appreciate all the thought that went into this and I like that Tekton lets the product developer introduce it. The materials are top grade stuff.
I do wish they had come up with something a little more original, as lots of this style roll exist.
I am not a big fan of these rolls for regular use because they take up a large flat footprint that has to lay somewhere. Great when perfect conditions exist, but otherwise will attract mud, snow, water, sand, etc. Some way to hang it would be beneficial. Ergodyne uses hang holes. I also like the see-thru pouches Ergodyne uses.
These type of rolls also notoriously difficult to organize without being cluttered as first order of retrieve-ability is limited.
For emergency use, its a solid option, except price. But those Juki sewing machines aren't cheap.

 

[Gangly]

^

$180.00

I believe I paid less than $20 bucks for this green nylon roll-up, which looks very similar to that one.
This one is China (PRC) made, and the overall dimensions are about 13" x 19", so it is considerably smaller than the Tekton unit.
The pockets on this unit are NOT long enough for an Indestro 15/16" x 1" double-end box wrench, and certainly not long enough for my Martin 17-inch breaker, or the small small socket/bit set in the center of the image. (Still waiting on Tekton's new model to replace it.)

What I wanted was something that would fit behind the seat of my standard cab Ranger. This one won't fit once it's loaded and rolled up, so I know for sure the Tekton model wouldn't fit either. This rides in a cardboard box on the passenger side floor pan for longer trips (along with a mess of other "emergency repair" items (gloves, duct tape, flashlight, etc.)

Spare bulbs is a smart one, not many people think of that.

 

[1320]

I signed up for the text notification about this yesterday, got the text today, read it, went inside to look at it on the computer and it was already sold out.

I spent more than a few moments trying to figure out which sockets and wrenches and such it came with for $180 before figuring out that was the empty price. It's neat, probably well built, US made, etc, but even at half the price, I'd think it was still too expensive.

 

[GeoBruin]

Looks awesome. I get that it's expensive but for many of us, that tool roll is going to be holding thousands of dollars worth of tools. It's not out of line. Especially if it continues to serve it's function for many years.

 

[dnschmidt]

Tekton has lost it's mind. TOPTUL gives you a tool roll with most of their sets and it's free and of super high quality. Their latest offerings makes me think that they've been visiting their local "dispensary" as pot stores are called here in Arizona.

 

[four.cycle]

Especially if it continues to serve it's function for many years.

^ True.

That little green one I picked up off ebay, while it does appear to be fairly well constructed, just doesn't "feel" like something you'd be using for 10 years, if it were in constant use. It does serve its purpose as intended: it holds tools that I hope I never have to use.

 

[mikey03]

^

$180.00

I believe I paid less than $20 bucks for this green nylon roll-up, which looks very similar to that one.
This one is China (PRC) made, and the overall dimensions are about 13" x 19", so it is considerably smaller than the Tekton unit.
The pockets on this unit are NOT long enough for an Indestro 15/16" x 1" double-end box wrench, and certainly not long enough for my Martin 17-inch breaker, or the small small socket/bit set in the center of the image. (Still waiting on Tekton's update on the "Small Engine Kit" to replace it.)

What I wanted was something that would fit behind the seat of my standard cab Ranger. This one won't fit once it's loaded and rolled up, so I know for sure the Tekton model wouldn't fit either. This rides in a cardboard box on the passenger side floor pan for longer trips (along with a mess of other "emergency repair" items (gloves, duct tape, flashlight, etc.)

What do you do with the small punches? Don’t think I ever used one outside of gunsmithing tbh

 

[four.cycle]

What do you do with the small punches? D

Good question. I paid $1.00 for that punch set at a garage sale. I already own more punches and chisels than I'll ever use, so I tossed 'em into that kit. I have no idea what use they might be for effecting an "on the road" repair.

 

[4xdog]

Seems kinda pricey for Tekton’s business model.

The Adventure Tool Company canvas roll I keep in the boot of my vintage Triumph TR3 does a fine job, and is also made in USA.

They’re pricey too, but still under a hundred bucks.

ShopRoll

Handmade in Colorado. The ShopRoll holds all tools, parts, & equipment for one vehicle, streamlining repairs. Everything stowed in one compact, portable place.

www.adventuretoolcompany.com

 

[mrjaw14]

I like the idea of that style tool roll. it's very well thought out. Love the hi-viz bottom panels in the pouches. I do like the pouches are 16.5". A lot of the smaller ones I can't fit the tools in the pouches I want, like breaker bars, long ratchets etc.

I thought hard about the atlas46 version years ago, but at the end of the day it's too much money. I settled on a clone that was $30 at the time. I can't see spending 180 on it when there are so many versions a 1/3 of the price. but I know atlas46 sold a lot of tool bags, so I guess there is a market for it, just not as big a market as there could be at a cheaper price.

 

[cody1325]

I like it.

Just not the price. I just bought an entire toolbox (27" Craftsman bottom) for $20 less.

 

[Karl_B]

I picked up this BucketBoss tool roll a couple months ago on clearance at Northern Tool. At the $30 or so I paid, I'm happy with it, but it's already starting to develop a couple of holes.

I know prototyping something is expensive and I don't expect them to sell the prototypes at a loss. If the Tekton roll is made of more durable material and the price comes down, I would consider it. The Tekton looks to be a bit wider, too, so that would help fit a couple of longer tools like bigger wrenches, a pry bar, or a hammer that won't fit in the BucketBoss.

I was using a duffle-like bag for my to-go stuff, but a bit of planning makes the tool roll just as viable with less space needed. The bag would get overloaded with random stuff and never seemed to get unloaded.

Edit: After watching the video, the Tekton is definitely bigger and better made. I might even be willing to pay that prototype price after comparing the construction quality shown in the video to the roll I have. I don't think this roll is going to be made in the USA to the current specs and sold for less than $100. Definite overkill for most people. As evidenced by them selling out, this roll will definitely make life easier for some people.

 

[merkyworks]

Love the concept but way to expensive. If i'm paying $180 it needs to come with tools. Or is that was US made cost these days?

 

[Bigblue&Goldie]

We use tool rolls made by PRP, Mastercraft, and Boxo in our various off road race cars. The key to keeping a tool roll alive is securing them in place. In our case, they go inside a mounted tool bag along with other supplies (zip ties, tie wire, grease, spare hardware, brake lines, gloves, rags, etc.)

 

[Stubby1743]

There are many similar tool rolls offered on Amazon Japan for about 1/10th of the price being asked by Tektron. For example:-

Amazon.co.jp: tool zone 工具バッグ ツールバッグ ペグケース ペグバッグ 収納 長さ３０㎝まで入る ツールロール 軽量 高耐久素材 : DIY・工具・ガーデン

Amazon.co.jp: tool zone 工具バッグ ツールバッグ ペグケース ペグバッグ 収納 長さ３０㎝まで入る ツールロール 軽量 高耐久素材 : DIY・工具・ガーデン

www.amazon.co.jp

 

[four.cycle]

Or is that was US made cost these days?

Yes.
Everything is ridiculously expensive now.
$11 bucks for a can of spray paint at ACE a few weeks ago.
It was American made paint.
I try to not look at it as "inflation". I just laugh, pay the man, and admit to myself "Damn I'm getting old!"

 

[four.cycle]

There are many similar tool rolls offered on Amazon Japan for about 1/10th of the price being asked by Tektron. For example:-

The pockets on that Japan-made roll are only 30cm long = 11.81 inches. Not long enough for my 12-inch Diamond Adjustable wrench.
The one I have now has longer pockets than that, but not long enough to hold my 15/16" x 1" double-end box wrench.
There is a HUGE advantage with the 16-inch pockets on the Tekton.
I do not disagree with anyone on the price point - it does seem a wee bit steep. Maybe I'm just a cheap ***.

 

[richfinn]

Price isn't really an issue for mobile guys (if it's a great product) Veto Pro-Pac also make a high end tool roll, and they don't struggle to find customers.

It always surprises me that nobody is shocked at fancy tool boxes costing thousands of dollars, but somehow a tool bag costing under $200-300 is considered outrageous.

If a big fancy toolbox isn't an option, why wouldn't you invest in decent quality mobile solutions instead?, I guess it goes with the territory of this site being primarily about garages.

https://vetopropac.com/tr-lc/

once you add the compatible socket/wrench rolls your at around $270 which makes the Tekton pricing about right if it's of decent quality

 

[LopezBart]

If you or your partner has a sewing machine, experimenting with different designs made from canvas duck that suit you is relatively inexpensive.

 

[richfinn]

Good question. I paid $1.00 for that punch set at a garage sale. I already own more punches and chisels than I'll ever use, so I tossed 'em into that kit. I have no idea what use they might be for effecting an "on the road" repair.

Useful for locking some Automatic Transmissions (like the Range Rover Evoque and Discovery) into neutral so you can winch or tow.

 

[Buckgnarly]

That would make a kick *** junk yard tool kit transporter. I'm glad and yet pissed at the same time I was not on this email list for this.....

 

[m6z]

If I used my tools to make money, the price doesn't seem out of line.

I don't though, so it's unlikely I'm a buyer.

 

[dscheidt]

If you or your partner has a sewing machine, experimenting with different designs made from canvas duck that suit you is relatively inexpensive.

I’ve never seen a tool roll that was worth a damn that wasn’t purpose built for the tools in it. That could be a factory made kit, or one made by/for the end user. It can fit exactly the tools you need, and can be as small as possible. General purpose rolls either don’t hold the tools you want, or have wasted space.

 

[merkyworks]

Tekton did a video explaining the design and construction if anyone is interested.

 

[Dig Doug]

I’ve had this Rhino tool tool bag for like 3 or 4 years
I keep it in my can am and it’s loaded up pretty good w/ can am specific tools.

Tool bag gets abused & tossed around, no rips, tears or broken stitching

can am is used primarily for off road use can roll out 800- 1000 miles in a long extended weekend! We like to run multi day rides, staying in hotels each night and hit various terrain in Arizona & Utah. One of our friends had a group of 5 or 6 sxs’s drove from Canada to Mexico mostly off road … Epic Trip !

 

[baldy343]

I was lucky enough to snag one of the green roll, and I have to say it is definitely worth the money.

Price isn't really an issue for mobile guys (if it's a great product) Veto Pro-Pac also make a high end tool roll, and they don't struggle to find customers.

This is super true, I am using it as my grab bag for Ag, and cars, and it keeps tools from clinking all day like in a tool bag, and allows for me to carry a staggering amount of decently organized tools with me where I need to go.

The Tekton looks to be a bit wider, too, so that would help fit a couple of longer tools like bigger wrenches, a pry bar, or a hammer that won't fit in the BucketBoss.

I am able to comfortably fit a 32? oz deadblow in the large flat pocket with space for gloves, fuses, sockets, and ratchet. Additionally, a 15in prybar fits in one of the pouches no sweat.

Most of these pictures are from when I first got it, and I have flushed out my pouches since then with more useful stuff.


If anyone has any questions or wants more pictures, let me know in this thread.

 

[BRZ Pete]

Tekton vying to be the next VIM

I gather that VIM is overpriced ?
Also yes, that is a lot of money for something that has so much competition probably coming from the same factory in China

 

[CallumRD1]

I gather that VIM is overpriced ?
Also yes, that is a lot of money for something that has so much competition probably coming from the same factory in China

 

[BRZ Pete]

Ah ok, that makes it much more palletable

 

[GeoBruin]

I was lucky enough to snag one of the green roll, and I have to say it is definitely worth the money.


This is super true, I am using it as my grab bag for Ag, and cars, and it keeps tools from clinking all day like in a tool bag, and allows for me to carry a staggering amount of decently organized tools with me where I need to go.


I am able to comfortably fit a 32? oz deadblow in the large flat pocket with space for gloves, fuses, sockets, and ratchet. Additionally, a 15in prybar fits in one of the pouches no sweat.

Most of these pictures are from when I first got it, and I have flushed out my pouches since then with more useful stuff.


If anyone has any questions or wants more pictures, let me know in this thread.

I would love to see some more pictures. Maybe more zoomed out showing the whole roll laying on the ground next to something for scale? I'm having a hard time wrapping my head around the dimensions. Thanks!

 

[baldy343]

I would love to see some more pictures. Maybe more zoomed out showing the whole roll laying on the ground next to something for scale? I'm having a hard time wrapping my head around the dimensions. Thanks!

Here's a picture with a JBL Flip 5 for scale. The left side is about an inch or two longer than pictured, but I have this packed to the gills, so it doesn't lay perfectly flat, but that's to be expected.

I'm excited to get to use my new knipex more often, as I lost them and had to replace them. I will say, the middle elastic does not allow for longer pliers to easily be retained. However, the pockets are stiff enough that I don't think they'll ever loosen up too much for the entire lifetime of the roll. They could almost be considered too stiff, but there is a tradeoff between initial fit and durability.