Any problems with doing half the shop at a time ?

[chopperman]

I'm using the rustoleum pro and have begun prepping. My problem is storage of shop equipment over the time periods needed for this project ( just don't have the space and it's not going out front unsupervised ), so I moved all my stuff to the right side and had planned prepping and finishing the left, then once cured I would tape off the left with poly and gorilla tape and work on the right ?

I was going to overlap the center by a few inches or so, anyone see any issues with this ?

Thanks

 

[Timm129]

The problem would be that a box is good for 2 car garage and therefore you would waste 1/2 of the mix.

 

[robertwa]

I'm curious about this too - surely you can mix half the contents first?

 

[bmwpower]

I don't see any issues with doing it. Measure out what you need and go for it. It's easier if you have a control joint in the middle for an edge, but tape should do. Just make sure you pull it up before it hardens!

 

[XR80David]

I don't see a problem with it. Just make sure when doing the second half that you don't go over the already cured first half. That would probably be noticeable.

 

[XR80David]

Oh and I don't recommend using "Gorilla Tape" Blue 3M masking tape will work just fine. But like BMWPower said make sure you peel up the tape before it dries.

 

[RCR]

Just finished my first half...waiting for warmer day to do second half..Used half of each can (Epoxyshield)...extra rollers and brushes....That way i can leave all the tools inside! GO for it!

 

[chopperman]

started painting tonight.

I used the other brands chips as I felt the rustoleums chips were too blue and GIRLY

I'm going to paint the sides black

 

[chopperman]

what the shop normally looks like

 

[chopperman]

I know... Drywall .. yeah yeah yeah