Anybody know about this?
- Thread starter Jethro608
- Start date
cookefab
Well-known member
Do you have any other info, besides the pic?
Rezeppa
Well-known member
You need to know if its a 1phase or 3 phase motor. If it is for residential use it can't be 3 phase.
FunkyfullWidth
Well-known member
They sold alot of 80 gal. single phase compressor that are animals. If it is three phase, you might be able to match up a single phase motor, but figuring out proper rpm's might be tricky. There's alot of good solid single phase compressors out there, be patient as they always pop up if you're looking.
Any chance on a bigger picture, someone may be able to id the pump at least.
Any chance on a bigger picture, someone may be able to id the pump at least.
454ragtop
Well-known member
Actually, it's not tricky at all. Just get same RPM, HP and frame designation as the 3 ph motor. BTDT. The other thing is, if it is 3 PH, it's probably better quality than something from a big box store or made for home use.
Jim
That's the only photo they loaded. I tried to blow it up. Just fuzzy. I think I'll see if can go to the address & see if the guy will let me look at. Heck he might just sell to??? Just wanted to get an idea on $$ first. Really want a vert. But northern tool is out of the reman. 80 for 500 missed that bus. & I'm going to get my hobart 140 this wk before I spend my whole bonus .(lol)
It LOOKS like a champion twin cylinder, two stage pump. Probably in the 3-7hp range, looking at ~16-22cfm @ 90psi. Hard to tell though. If you can see it run from empty up to a known pressure and time it, you can then calculate the CFM of the pump.