Armorseal HS 1000 question

[RacerDad21]

New to the garage journal and so far nothing but great ideas and advice!! Question, Is armorseal HS 1000 a 1 gallon to 1 gallon mix(one being color and one being hardner)?? Have used Sherwin Williams 2 part epoxy in the past and had really good results! Thanks in advance for your time!!

 

[LegacyIndustrial]

From the SW website:

Epoxy coatings are generally packaged in two parts that are mixed prior to application. The two parts consist of 1) an epoxy resin which is cross-linked with 2) a co-reactant or hardener. Epoxy coatings are formulated based upon the performance requirements for the end product. When properly catalyzed and applied, epoxies produce a hard, chemical and solvent resistant finish. They are typically used on concrete and steel to give resistance to water, alkali and acids. It is the specific selection and combination of the epoxy component and the hardener component that determines the final characteristics and suitability of the epoxy coating for a given environment.

The A usually contains the color, B is clear/amber.

 

[Shea]

Yes, it's a 1 to 1 mix according to SW. Usually when they are mixed together it will equal one total gallon.

 

[RacerDad21]

Thanks!!!