Assorted Snap On, Mac, and misc.

[454ragtop]

Location

Carver, MA

Price

varies

Just in time for your black Friday shopping I present this assortment.

First 2 pics, Cj93B slide hammer puller set, in original box, box is pretty beat up, I had to tape the corners, second pic shows broken attachment, not sure how this attachment is even used, maybe it could be welded? $110.SOLD

Third pic - freeze plug installer set, appears to be unused, mint, $70 SOLD.
Blue point GA438 18" precision straight edge in vinyl pouch $40. SOLD Ebay

Fourth pic 38" -3/4" 7 piece crowsfoot flare nut wrench set $65. SOLD
3/8" drive inpact tool in case with 6 bits, #2, #3, #4 Phillips and 3
sizes of straight blades, all Snap On $80. SOLD Ebay
Note spinner is not
included, used it to hold the case open, see next lot.

Fifth pic - SIM400 1-1/4" flank drive deep impact socket, new/unused $18.SOLD Ebay
STMM5.5 5.5 MM deep 1/4 drive socket flank drive $8.00 SOLD Ebay
SFS081 3/8 drive 1/4" deep socket $5.00 SOLD Ebay
TM4CS spinner with drive end to use as an extension, handle shows wear $15.SOLD Ebay
S5929A brake spoon, make a nice little pry bar, nice shape, $10. SOLD Ebay
RXM1012S metric flare nut wrench, 10 and 12 MM $12. SOLD Ebay
MD-17 distributor tool?, looks like it would work for carb jets $4.00
F67A 3/8 drive ratchet head, appears new/unused $20. SOLD Ebay
S67 1/2" drive ratchet head, good shape, shows a little wear $25. SOLD Ebay
Cj124 P/s & alternator pulley puller $20. SOLD
A80A stud tool, nice shape but is missing 1 A80A2 jaw gear (cost $4.60 from Snappy) $50.
Empty socket box, KRA229?, dirty, paint loss, but solid, minimal surface rust $20. SOLD Ebay


Sixth pic - Carb adjusting tool kit, can't find this one in any catalog, includes the adjuster tool, S6135A and S6136A screwdrivers, and 5 sockets, S6138, S6139, TM85, TM83A, TM84. Looks like a prior owner changed the bend on the end of the adjuster tool a little, note how it doesn't quite line up with the tray. I have another, shown right in front of the kit which fits the tray, but has very bad chrome. Buyer can have EITHER one, both work perfectly $50.00 Note that the tray is cracked in a few different places. SOLD Ebay
FX18 3/8 drive 18" extension $15.
CJ123-1 wheel/hub puller flange $30.00 SOLD Ebay
S5902 wrench, 17MM allen plug & 21 MM 12 point box $15. SOLD Ebay
A51 saw, no blade $5.


Seventh pic - New in pkg Dewalt 3/4" drill, 3/8" shank DW1625 $12.00
36MM axle nut impact socket, unknown maker, just says made in USA, nice shape $8.00 SOLD
MAC CB16N1 1/2" torque adapter, 3/8 drive $10.00
MAC metric stubby wrench set 10MM -19MM in tray, some wear to chrome, tray is a little beat up $100.

Shipping not included, will ship as reasonable as possible. Thank you, Jim Bishop
PM, email [email protected] or PH. 508-866-584zero

 

[454ragtop]

Snap On ignition wrench set in roll up pouch. Super nice, but note the very faint owners marks, pretty hard to see, I almost missed them. $40.00 shipped. SOLD


Snap On 3/8" X 7/16" flare nut or line wrench, again real nice but has the same very faint owners mark. $16.00 shipped SOLD

 

[454ragtop]

4 piece Snap On 1/2" drive extension set, SX2, SX3, SX5, and SX10. Real nice, note the same very hard to see owners marks, longest extension has a couple minor marks in the chrome. $65.00 shipped. SOLD Ebay


5 Cornwell "Saltus" wrenches, 3/8", 7/16", 5/8", 11/16", and 3/4" Nice shape, little wear to the chrome, all the socket heads are snug to the handles, don't flop around. $60.00 shipped SOLD Ebay

 

[454ragtop]

Machinery's Handbook, 22nd edition, clean copy with the dust jacket, $25.00 shipped media mail.

Bonney 2591A stud puller, 1/2" drive, nice shape. $23.00 shipped Priority SOLD Ebay