Atlas 9KBP opinion?

[70runner]

Need to replace current lift, considering Atlas 9KBP as dimensions very similar to current lift. Have read some positive opinions here, are owners still happy with their Atlas? Greg Smith site says these lifts are made in China - anyone have trouble getting parts?

The 9KBP manual shows the overall baseplate dimensions, but not the individual holes. Would someone with a 9KBP be able to provide a layout of the baseplate fastener holes dimensions. Want to see if I can use any of my existing anchors or perhaps drill holes in the 9KBP baseplate to match my anchors. TIA.

 

[buckshot00]

I just purchased a similar model, AMGO BP-9X (which is the Peak 209X)

many of the Chinese lifts are 'rebranded' Peak lifts .... http://peaklift.cn/cpzx/list_32.aspx?lcid=11

 

[Handyandy23]

I have what's branded as an Elite 9KBP, which from what I can tell is identical to the Atlas, just black and branded differently. The user manual is identical.

I've had it a couple years now and I've been happy with it. Although I can't really comment on difficulty in getting spare parts because I haven't had to replace anything yet. I'm guessing it's not going to be super easy, but hopefully I won't have to find out for a long time.

Overall the lift just works well. Lifts my half ton truck with no issues, although I haven't tried to load it anywhere close to the max yet.

I'll try to get you some measurements on the mounting holes later today.

 

[Handyandy23]

I just emailed you some measurements, Richard. Let me know if you didn't receive it, or if you need any other info.

 

[Scud67]

Love my Atlas 9KBP - never had any issues with it.