To avoid these ads, REGISTER NOW!

Awesome work light!

Status
Not open for further replies.

MarkG

Well-known member
Joined
May 23, 2012
Messages
1,219
Location
Elgin, IL
I don't write about or recommend a tool very often unless I really like it, and this is one of those times!

I just bought this light and LOVE it! Super-rugged, very bright, feels well-built, and has several ways to mount it depending on your task and location---either hanging or with the attached magnets on the back. Also has a nice 25' cord with an additional outlet. That's a PLUS for me----I HATE cordless stuff unless I absolutely HAVE to use it, since corded is always full-power and ready to go. No messing around with dead/dying batteries, remembering to charge them, etc. Sturdy, easily-accessible push-on push-off switch. Also a 3-year warranty.

If you need an awesome light of this type for automotive work---check this one out:

https://www.homedepot.com/p/Husky-80...0228/305124388
 
Last edited:
To avoid these ads, REGISTER NOW!

exmaxima1

Well-known member
Joined
Jun 25, 2011
Messages
6,339
Location
Midwest
800 lumens is equivalent to a standard 60 watt bulb. Not bright enough for my garage, but probably ok under the hood of the car.
 

coljar

Well-known member
Joined
Sep 26, 2010
Messages
6,243
Location
Belpre, Ohio
OP's been around for some time and has 1107 posts. It's not spam, but for my use, it wouldn't be practical. I've used retractable cord reels for 40+ years and don't like cords across the floor anymore than I have to. I use cordless a lot nowadays and always have 3 or 4 charged up and ready to go.
 

Zmann

Well-known member
Joined
Feb 24, 2019
Messages
302
Location
Arizona
well I am not a spammer and not saying the OP is, but I do have the cordless version of this shown in the link he provided , it has magnetic back and two brightness it is a pretty good light for under my 2 post
 
OP
M

MarkG

Well-known member
Joined
May 23, 2012
Messages
1,219
Location
Elgin, IL
this is spam right? the way it's written is suspicious.
This forum is called 'Garage Journal' right?? And most guys use a work light all the time in their garages, right? How would you like me to re-write it so it doesn't look like 'spam' to you?? I'm simply giving a personal review to anyone who may be looking for a work light of this style and I'm very happy with it-----I believe that's one of the main benefits of being on a forum and hearing real people's experience with certain tools.

Buy what you want. Do you own research if you want, I couldn't care less what anyone else buys. (and returns). Just giving a heads-up to guys who can appreciate it, as I appreciate honest reviews and have been happy I bought several things based on reviews from actual buyers and users of products being recommended.
 
Last edited:

kaymccampbell

Well-known member
Joined
Feb 27, 2015
Messages
29,427
Location
Upstate New York
Maybe he just payed attention in his college English classes, who knows! The guys who are 'poor' are the skeptics who can't take advice or don't appreciate it.

but ill try to rite worser in the futur if that makz everything more beleeevable to u

Pull your leg a bit, and it comes off. You need to get some thicker skin. Probably comes with age. Your review really does look like an ad for the thing. It's OK, I followed the link, and I like it. I might just skive one onto my drop light reel.

Inthameentimrelksabitntaksumdepbreths.
 

lilbilly666

Active member
Joined
Aug 21, 2019
Messages
31
Location
Georgia
My uncle got me one of these as an Xmas gift. Surprised by how heavy it is. If it ever fails I can use it to bludgeon would be attackers.
 

SuitorsGarage

Well-known member
Joined
Mar 18, 2011
Messages
222
Location
New Hampshire
I keep on of these in my work box. I think it is a great light. I was looking for a corded backup and tried this mostly on the length of the cord. I was impressed with it for what I paid. Used it a little to close to a plasma cutter on some equipment and trashed the lens but it still is usable. I'll buy another one someday.
 
To avoid these ads, REGISTER NOW!
OP
M

MarkG

Well-known member
Joined
May 23, 2012
Messages
1,219
Location
Elgin, IL
He has over 1100 posts, and your calling him out for posting spam ? :lol_hitti

Exactly! And for the skeptics, are they ever able to take advice or a tip, or is it all dismissed as 'spam' or someone with an ulterior motive?

Keyboard experts abound on this forum, telling me this light is the same as a 60W bulb, etc. Oh, REALLY!!?? :D Pretty sure I was using 60W bulbs in my trouble lights before you were ever born, not to mention a 60W bulb breaks at the slightest bump----been there, done that, this is miles beyond those.

Use what you want though, I'm only helping those who are capable of being helped.
 
OP
M

MarkG

Well-known member
Joined
May 23, 2012
Messages
1,219
Location
Elgin, IL
I don't have one of those, nor will I be purchasing one. My favorite drop light uses a PL-13 fluorescent.

I don't have one of those, nor will I be purchasing one. This one is great and doesn't have a bulb to break.
 
Last edited:

gizardlizard

Well-known member
Joined
Aug 29, 2019
Messages
725
Location
Madison, WI
I agree with you Mark. I don’t care for cordless lights either. I do have a few and will use them now and then for stuff that doesn’t take too long but if it’s hours long I only use corded lights. Hate seeing the light get dimmer and dimmer. Next time I’m there, I’ll Check it out. By the way, my better half is from Elgin.
 

Plombob

Well-known member
Joined
Oct 19, 2008
Messages
4,116
Location
Tennessee
I have two droplights. One corded one cordless. They are both good. The cordless lamp has a good cycle time.

The orange one is from HomeDepot HDX PTL-R-2506. The Bayco is BA-2116.

View media item 110459
I've used fluorescent lamps and I'm done with them. LEDs are so much better.
 

James-W

Well-known member
Joined
Feb 3, 2013
Messages
12,432
Location
Southeastern Wisconsin
I have both corded lights and cordless lights, but I prefer the corded ones when working in the garage. Last year when I was installing a light in my daughter's ceiling and had to crawl up into the attic, the cordless light was much nicer to use in that situation. I guess the best type of light, corded or cordless, depends on what you are doing and where you are working.
 

mmb617

Well-known member
Joined
Dec 5, 2010
Messages
4,424
Location
PA
I have both corded lights and cordless lights, but I prefer the corded ones when working in the garage. Last year when I was installing a light in my daughter's ceiling and had to crawl up into the attic, the cordless light was much nicer to use in that situation. I guess the best type of light, corded or cordless, depends on what you are doing and where you are working.

That's the key point. As in most things having the right tool for the job makes it easier. Of course you also have to know how to use that right tool, but I think most of us can figure out how to use a light.
 

olytdi

Well-known member
Joined
Dec 3, 2011
Messages
2,202
Location
Olympia, Washington
I don't write about or recommend a tool very often unless I really like it, and this is one of those times!

I just bought this light and LOVE it! Super-rugged, very bright, feels well-built, and has several ways to mount it depending on your task and location---either hanging or with the attached magnets on the back. Also has a nice 25' cord with an additional outlet. That's a PLUS for me----I HATE cordless stuff unless I absolutely HAVE to use it, since corded is always full-power and ready to go. No messing around with dead/dying batteries, remembering to charge them, etc. Sturdy, easily-accessible push-on push-off switch. Also a 3-year warranty.

If you need an awesome light of this type for automotive work---check this one out:

https://www.homedepot.com/p/Husky-80...0228/305124388

Thanks Mark - looks like a good light that I'll check out next trip to HD!
 

cruzer75

Well-known member
Joined
Feb 7, 2009
Messages
206
I have been thinking about a corded drop light for the garage. I use my head lamp a lot, but since my garage is small I can plug this in the middle ceiling plug and it will go anywhere I need it. Thanks for the tip!
 
OP
M

MarkG

Well-known member
Joined
May 23, 2012
Messages
1,219
Location
Elgin, IL
this is spam right? the way it's written is suspicious.
Nope. Just trying to help anyone who needs a good work light. Learning from others is what online forums are all about. How would you re-word it to NOT sound 'suspicious', and still let people know you're happy with it?? :D Good grief.
 
Last edited:
OP
M

MarkG

Well-known member
Joined
May 23, 2012
Messages
1,219
Location
Elgin, IL
People are still buying plug in drop lights? C'mon man this is 2021 we have lithium batteries now and there very cheap.
They sure are! Batteries go bad, lights dim, they go dead at the wrong times, and you STILL need to plug them in to charge them, then you have to wait----I have nothing against using corded tools at all. The most powerful, reliable, and best tools in my shop all use cords.
 
Last edited:

nh_yota

Well-known member
Joined
Mar 10, 2015
Messages
4,068
Location
Seacoast New Hampshire
I have both corded and cordless work lights. I'm a big fan of the cordless LED worklights from Astro Tools and they are perfect when you're working in tight spaces or somewhere not near an outlet. I use my corded work lights / clamp lights when I'm working on something for hours and power cords are not an issue.
 

Jagmandave

Well-known member
Joined
Nov 6, 2011
Messages
6,299
Location
Overland Park, Ks.
I have a couple of questions: first, how warm does it get? I know it's not like an incandescent but some LEDs get pretty warm....would it be safe if you left it lying on your seats for example?

2nd, I've noticed that with LEDs lens design is really important - I have some LED flashlights that while bright enough, they don't seem to "throw" the light very far - say into a dark engine bay where you're trying to see something buried under a bunch of other somethings. I have other flashlights that send a very good but very narrow beam that penetrates really far, but is very narrow - you really need to aim them.

What's been your experience?

Lastly, Edd China has some round, magnetic, adjustable LED lights that he uses that seem to have amazingly long battery life, anyone know of something similar here in the states?
 

73project

Well-known member
Joined
Jan 16, 2014
Messages
82
I have no use for battery-powered flashlights working on cars. To each his own. BTW---how do you charge your batteries without 'plug in'?? :D
His house is situated directly under a 330kv power line. For some reason, he has never had to recharge his flashlights since new!
 
OP
M

MarkG

Well-known member
Joined
May 23, 2012
Messages
1,219
Location
Elgin, IL
I have a couple of questions: first, how warm does it get? I know it's not like an incandescent but some LEDs get pretty warm....would it be safe if you left it lying on your seats for example?

2nd, I've noticed that with LEDs lens design is really important - I have some LED flashlights that while bright enough, they don't seem to "throw" the light very far - say into a dark engine bay where you're trying to see something buried under a bunch of other somethings. I have other flashlights that send a very good but very narrow beam that penetrates really far, but is very narrow - you really need to aim them.

What's been your experience?

Lastly, Edd China has some round, magnetic, adjustable LED lights that he uses that seem to have amazingly long battery life, anyone know of something similar here in the states?
After being on for a minute, the lens is still just slightly warm and doesn't seem to get any hotter----I can comfortably touch the lens with my hand. But I'm not a lawyer and I do not represent the company and I'm sure someone can find a way to harm themselves, others, or their property with a light or just about anything else, so do your own research! As I stated in my original post----I love it, but some guys aren't happy with anything, so some may not like it. If you have a problem with cords---don't buy it. It is corded. This is a plus in my book.
 

Bretny

Well-known member
Joined
Jul 31, 2017
Messages
3,918
Location
Dutchess county NY
Sure are! Batteries go bad, lights dim, they go dead at the wrong times, and you STILL need to plug them in to charge them, then you have to wait----I have nothing against outlets at all.
And you have to plug it in every time to even use it.
 

Jagmandave

Well-known member
Joined
Nov 6, 2011
Messages
6,299
Location
Overland Park, Ks.
You know, I didn't say anything about not liking cords, nor was I looking for some sort of guarantee about it not melting things, I only asked for your experience......
 
Status
Not open for further replies.
To avoid these ads, REGISTER NOW!
Top Bottom