Awning questions

[nonhog]

Just wondering if anyone has added an awning that does not look like the
cheapo $89.00 type. I'm wanting to add one on the side of my shop but I'm pretty sure it will have to not be attached for permit reasons.
On the left, looking at the shop.

Its for parking my driver out of the elements when the shop is full. (often)
Figured I'd have to make my own. Which is fine.

Any thoughts?

 

[49stude2r6]

I have been thinking about this post for two straight days (I think I have a problem). The unique architecture of the shop makes this one a bit of a challange. My first thought is a carport roof just under the existing sloping in the same direction. Not attached though is a bit tougher. Perhaps a roof slopedtoward the rear of the building, still a carport standing upon four posts. In my county you don't need a permit for anything under 200 sqft so I might try to keep it at 10x20 to skirt that. But I think there are different rules if you attach to an existing structure (ala front porch).
Just so I am clear you are looking for a cover over the area the suburban is currently sitting?

 

[nonhog]

In my county you don't need a permit for anything under 200 sqft so I might try to keep it at 10x20 to skirt that. But I think there are different rules if you attach to an existing structure

Just so I am clear you are looking for a cover over the area the suburban is currently sitting?

200 sqft here in Pierce co. also. My concern is making it a good weather cover thats not attached so its portable. I think that clears me of permits.
(have yet to confirm that)
Yes right where the 49 (panel) was sitting.

I'm torn between going under the overhang or slightly above the roof.
pros and cons both ways.

Then the question of where to source the tarp?

 

[James E]

I guess you could get one of those sundowner thingies. It would roll up and lay flat against the side of the shop when not in use but pull out over the panel truck when you want it to. You'd have to retract it to drive in and out since the arms are at the ends and hinge out, but it would somewhat follow the slope of the roof when extended.

 

[49stude2r6]

I was thinking you cover it in sheet metal.

 

[nonhog]

I guess you could get one of those sundowner thingies. It would roll up and lay flat against the side of the shop when not in use but pull out over the panel truck when you want it to. You'd have to retract it to drive in and out since the arms are at the ends and hinge out, but it would somewhat follow the slope of the roof when extended.

Those are cool but not winter friendly as well as the huge fir tree branches that come down every wind storm.

I was thinking you cover it in sheet metal.

I would prefer that but the county would not. They scan the aerial pics for structures and will come to visit.
I'm saving my 10x20 permit free structure for a yard/garden/junk shed.

 

[JohnnyAtomic]

you can put a a pvc carport that will protect your truck all over. the are portable so you dont have to permit, I always think spending a little more money the first time is the best way to go.
http://www.google.com/imgres?imgurl...en&ndsp=18&tbm=isch&ei=Yw6zTd_wPIjjiALG1eSvBg

 

[49stude2r6]

I am pretty sure our county rules allow multiple 10x20 structures, without permit, which is a terrible policy as it generates several small sheds on places instead of a decent structure.

 

[nonhog]

I am pretty sure our county rules allow multiple 10x20 structures, without permit, which is a terrible policy as it generates several small sheds on places instead of a decent structure.

Pierce use to be multiple sheds up to 120sqft. then changed to one 200 sqft.

 

[grog]

There might be some helpfull info here:http://www.creativeshelters.com/

Grog

 

[Ray-CA]

How about something like this: http://www.sunsetter.com/?srccode=2498&srccode2=21743S186633130

Ray