To avoid these ads, REGISTER NOW!

Bahco Tools

To avoid these ads, REGISTER NOW!
K

kartracer55

Well-known member
Joined
Jun 21, 2005
Messages
5,317
By snap on made in USA, how bad can they be? Bahco Nut drivers are supposed to be pretty popular. I think Bahco is a line intended to be sold overseas

Jim
 
U

Uncle Buck

Banned
Joined
Mar 7, 2005
Messages
9,120
Location
Kansas
I dunno, I don't have a good feelin about this brand. Looks good but are you guys for sure it's made by Snap-Off? :bs:
 
R

ringer

Well-known member
Joined
Aug 22, 2005
Messages
71
Location
Big Sky Country!-Montana
Yeah, its made by Snap-on, and while I have no idea on the quality, you can get the Bahco stuff super cheap on ebay. I buy all of my snap-on stuff on ebay too BTW.
 
L

Luckydevil

Well-known member
Joined
Jan 1, 2005
Messages
1,469
Location
Tampa
I spoke with a Snap-On rep on the phone and he said that Bahco tools are made to Snap-On standards. Bahco is just a company that Snap-On bought and took over. He said they are made in the US and are not meant for sale overseas.

Bahco is a seperate entity from Snap-On though, and if you did have a warranty issue you would have to go through Bahco and not Snap-On.

I tried to get a hold of someone at Bahco to find out about the warranty, but all I got was voicemail. She said she would be back tomorrow.

Bahco: 1(800)867-8665
 
D

djjack

Well-known member
Joined
Apr 8, 2005
Messages
91
Location
at work
I'm not sure about the quality of the Bahco tools however the Overstock babe looks first rate.
 
U

Uncle Buck

Banned
Joined
Mar 7, 2005
Messages
9,120
Location
Kansas
This is one of those deals like when Snap-Off bought Williams tool a few years back. Everyone assumed that they were making the Williams tool line. Snap-On kept Williams a few years then I think they sold em, but they never did actually manufacture the Williams line.
 
U

Uncle Buck

Banned
Joined
Mar 7, 2005
Messages
9,120
Location
Kansas
I got to lookin at the close-up view of those tools on the link and decided that whoever makes I think either Allen brand, or Kobalt is the true manufacturer of this stuff. Probably Danaher (sp). Look for yourself at the double line font to the letters that can be seen on the tools. The lettering reminds me of one of those two brands, I just can't put my finger on which one. :headscrat
 
K

kartracer55

Well-known member
Joined
Jun 21, 2005
Messages
5,317
Check out the handle on thier 1/4 driver... Looks like a snap on handle. Hell anybody want to go for it and try them out? The tools look to be of just a less intricate design... The ratchet handle is less complicated that a current snap on, probably keeping the cost down.

Jim
 
T

Thumper

Well-known member
Joined
Jun 5, 2005
Messages
2,209
Location
N.E.Ga
I have a pair of Bahco pliers. They are marked Sandvik Bahco and mine are stamped Made in France. The model number is 8224. They are about 15 years old. A guy gave them to me.
 
To avoid these ads, REGISTER NOW!
T

Theo

Well-known member
Joined
Oct 8, 2007
Messages
475
Location
Oakville, On Canada
Bahco North America was a division of Snap-on Tools, and a brand of tools up until Jan 1, 2007 when Snap-on launched the J.H. Williams Tool Group.

Bahco North America no longer exists as a company, but only as a brand within JHWTG.

JHWTG is the distribution arm of Snap-on Tools. The business model is to sell industrial tools via distribution (Motion Industries, Hagameyer, PTS etc.) rather than via franchisee (Snap-on Truck) or direct sales (Snap-on Industrial).

The JHWTG line consists of J.H. Williams Hand Tools, CDI Torque Products, Bahco Tools, and Milford Band Saw Blades.

The quality for the tools range from good/better/best.

Good - JH Williams "Global" tools. Any Williams tool not marked as "Made in the USA" falls into this category. The tools are made at various offshore facilities to Snap-on Specs. These tools are designed to offer a quality tool at a lower price point.

Better/Best - There's a lot of interchangeability here between which Williams tools is better than Bahco and vice versa. The Williams Tools in this category are "Made in the USA" while the Bahco tools can be made in any number of global facilities in UK, Sweden, Portugal, Spain or France. I know I'm forgetting some. These are high tech facilities and in most cases I believe they are union shops. The Williams tools are very rugged and high quality no nonsense industrial tools. Bahco Tools feature some interesting ergonomic features and tend to focus more on "tradesman" (Plumbers, Electricians, HVAC Techs etc.)
 
R

reversegear

Well-known member
Joined
May 24, 2007
Messages
298
Location
Taichung, Taiwan
Bahco is still sold in Europe by Snap-On's European division (SNE). They also sell a couple of other brands that I can't remember right now. Anyway, the stuff we tested was all good.
 
D

danski0224

Well-known member
Joined
Jan 29, 2005
Messages
13,363
Location
Near Naperville, IL
chevy302dz said:
Does anyone have some actual experience or a opinion of this line of tools?
Click to expand...

I own a Bahco adjustable wrench- think Crescent brand, not Channelock.

No complaints, seems to be very well made. The jaws seem to be a bit longer than the Crescent style, which is good. Much nicer than the Craftsman style that I have- not that Craftsman is bad, though.

It was more $$$ than Craftsman, and it may be difficult to return the Bahco if there is a need for warranty service, unlike the Craftsman version.

According to the casting, this type of tool was "Invented by Bahco".

I suspect the other tools in the line are equal quality.
 
T

Theo

Well-known member
Joined
Oct 8, 2007
Messages
475
Location
Oakville, On Canada
It was more $$$ than Craftsman, and it may be difficult to return the Bahco if there is a need for warranty service, unlike the Craftsman version.
Click to expand...

If you call JH Williams they could direct you to a local distributor that could help you out if it every broke.

I should make it known that I am I J.H. Williams Tools Group employee. I didn't join The Garage Journal to sell tools though ( I couldn't, even if I wanted to anyway)

I'm just a "tool guy" hanging out.
 
I

ImportTuner

Super Moderator
Staff member
Joined
Jan 9, 2007
Messages
5,855
Location
SF Bay Area
Theo said:
If you call JH Williams they could direct you to a local distributor that could help you out if it every broke.

I should make it known that I am I J.H. Williams Tools Group employee. I didn't join The Garage Journal to sell tools though ( I couldn't, even if I wanted to anyway)

I'm just a "tool guy" hanging out.
Click to expand...

So, what's your personal opinion of JH Williams tools ... compared to other tool companies like Snap On, Matco, Mac, etc ...
 
M

Major Ramifications

Well-known member
Joined
Feb 28, 2005
Messages
4,673
Location
River Ridge, Louisiana
Theo said:
If you call JH Williams they could direct you to a local distributor that could help you out if it every broke.

I should make it known that I am I J.H. Williams Tools Group employee. I didn't join The Garage Journal to sell tools though ( I couldn't, even if I wanted to anyway)

I'm just a "tool guy" hanging out.
Click to expand...


Cool, thanks for letting us know.
I would say that you are fortunate to work in an industry that you love.
Do you mind if I ask what you do?
 
T

Theo

Well-known member
Joined
Oct 8, 2007
Messages
475
Location
Oakville, On Canada
ImportTuner said:
So, what's your personal opinion of JH Williams tools ... compared to other tool companies like Snap On, Matco, Mac, etc ...
Click to expand...

BrianAltenhofel said:
That's a question that can damn someone either way they answer :wtf:
Click to expand...


Yes, yes it is...

All the brands you've mentioned are great, and tool performance varies by application. It's hard to make a blanket statement that would hold true for any application.
 
C

Charles (in GA)

Well-known member
Joined
Jan 11, 2006
Messages
12,489
Location
50 mi south of Atlanta
danski0224 said:
I own a Bahco adjustable wrench- think Crescent brand, not Channelock.

No complaints, seems to be very well made. The jaws seem to be a bit longer than the Crescent style, which is good. Much nicer than the Craftsman style that I have- not that Craftsman is bad, though.

It was more $$$ than Craftsman, and it may be difficult to return the Bahco if there is a need for warranty service, unlike the Craftsman version.

According to the casting, this type of tool was "Invented by Bahco".

I suspect the other tools in the line are equal quality.
Click to expand...

Bahco History

http://www.bahco.com/asp/pubs/index.asp?lngLevel=0&lngStructureID=1219&lngMenuID=1255

Bahco Milestones

http://www.bahco.com/asp/pubs/index.asp?lngMenuID=1255&lngID=1987

Yes, they invented the adjustable wrench, I have a Volvo branded one that is from the 50's. Has the V shaped opening in the end of the handle, one side smooth, one side serrated, for turning nuts. Interestingly, the threads on the open close knurled nut are backwards to American made adjustables.

Charles
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom