Beacon Morris wiring problem

[Scott A]

During installation of a Beacon Morris BRU 75 garage furnace I accidentally pulled off 2 orange wires. This furnace is equipped with a circuit board. Can anyone send or post a picture of the internal circuit board and all other connections so I can fix my problem?

 

[ForceFed70]

Your heater should come with a wiring schematic. Either in the manual or as a sticker affixed to the heater or service panel.

 

[dw1]

During installation of a Beacon Morris BRU 75 garage furnace I accidentally pulled off 2 orange wires. This furnace is equipped with a circuit board. Can anyone send or post a picture of the internal circuit board and all other connections so I can fix my problem?

Your heater should come with a wiring schematic. Either in the manual or as a sticker affixed to the heater or service panel.

Can you take pics of both and post them on here.

 

[Scott A]

These are pictures of the 2 wires in question

 

[Scott A]

I have posted some pictures. The schematic doesn't show the wires in question

 

[Scott A]

I have posted pictures. The shematic doesn't show the wires in question

 

[Z2V]

??? Do they plug together? I only asked from looking at the pics. I know nothing about your heater.

 

[Z2V]

Can you post the schematic?

 

[Z2V]

Is there a terminal labeled "R" on the circuit board that does not have a wire on it? Maybe along the left side. By the picture the loose red wire goes down to terminal next to blue and yellow?

 

[smalltown]

Scott have you resolved your problem with the heater?
I have a sterling heater and my schematic looks the same.
If your still in a lurch I will go out take my cover off and take some photos.

I have heard in the past the heaters were the same and the schematic looks the same.

 

[Zeke]

Here ya go:
http://beacon-morris.com/modules/lit_lib/download.asp?litFileID=1944

 

[Scott A]

I have figured it out. the pilot ignitor on the circuit board had went bad and someone had added a White Rodgers pilot relite: 5059-23, which is also bad.Therefore leaving the original wire hanging off the circuit board and rerouting the 24v hot & grnd.to the add-on pilot relite.
Thanks for trying to help!

 

[smalltown]

Glad you figured it out. It's getting cold out there.

 

[Scott A]

I have figured it out. the pilot ignitor on the circuit board had went bad and someone had added a White Rodgers pilot relite: 5059-23, which is also bad.Therefore leaving the original wire hanging off the circuit board and rerouting the 24v hot & grnd.to the add-on pilot relite.
Thanks for trying to help!