Bendpak 4 post lift question

[ml504]

I have finished installing my hd-9xw and before putting a vehicle on it I adjusted all ladders so that they all clicked in sync when rising. I put my truck on and started raising the lift to find that they all click at different times it seems. They are all within less than or close to a second total but still not perfect like when unloaded. Is this normal? If not, how do I adjust this?
Thanks,
Matt

 

[darkk]

That's normal, the cables will stretch out for a while. jJust readjust them as necessary...

 

[holdover]

ditto, just be sure that you hear 4 clicks, then lower down to lock in

 

[ml504]

Thanks.

 

[Capt J.D.]

I have the same lift. Listen for the 4 clicks! Sometimes they sound pretty close together, and make sure all 4 corners are coming down.

 

[gygeneral]

The guy who installed mine prefered to set it up so you hear the four clicks , if they all click perfectly in sync you are not sure if they are working.

 

[akdiesel]

The guy who installed mine prefered to set it up so you hear the four clicks , if they all click perfectly in sync you are not sure if they are working.

Exactly. Not that the system is designed to work so they are clicking at separate times but it is a reassurance they are locked in.

 

[JKJavelin]

Great advice. A perfectionist would like to have them all exactly the same. I see the wisdom in this.