besides bearings what can u do with a press

[fsae0607]

I've also used mine to make some custom exhaust adaptors and flares, using trailer balls as mandrels. Worked far better than I thought it would, actually.

I will be stealing this idea, thank you very much!!

 

[On-Wheel]

I put a vice on a 2x10 board and held the vice with the press.And I C-clamp it to other places I work at home.That video above,man talk about stuck,dahm!

 

[RPH]

Simple, apply pressure to what ever needs it. Friends, low life's, parts, ect.

 

[Bald_and_grumpy]

Reverse the eyes on your leaf springs to squeeze out every drop of drop for your old shop truck.

 

[Bessy]

I know I could have used one a few months back trying to get a 5/8" bolt out of the front axle of the tractor. Drilled it out, made a mess, not pretty. Luckily, you can't see that part when it's all back together.

 

[Flivver250]

Ball Joints two. Seen some stubborn ones in large rusty trucks (prior to my BJP1).

 

[rodsnratfinks]

I miss having mine. I used to have a 60 ton job. I'm getting so many ideas here.

Sent from my SM-G920V using Tapatalk

 

[B_Bimmer]

Make apple cider.

I read the whole thread and rank this as the best idea... Not necessarily the most productive, but the best.

 

[md21722]

They are like front end loaders, maybe not sure why you'd need it but once you have one you don't know how you got along without it.

 

[stevenhs]

Lower control arm bushing