Best T-handle torque wrench?

[Vifa]

Hi,

I find it hard to find a good quality torque wrench with a T-handle.
Not many make these, and those who do often make them in a poor quality.

Can anyone recommend a good torque wrench with T-handle?

 

[cleaner]

CDI Torque Products TorqControl TLA28NM

Not exactly a T handle. Comes with calibration docs and is well made. COO is China if that matters. Low cost and functional.

Tohnichi has a T handle
https://www.tohnichi.com/products/dial-torque-wrench-T.htm
High quality with cost to match

 

[Kps]

I’m pretty happy with this CDI Torque TLPT5NM 5 Newton Meters Pre Set Torque Limiting T Handle https://www.amazon.com/dp/B004XG5YIA/?tag=atomicindus08-20

 

[macgee]

Hi,

I find it hard to find a good quality torque wrench with a T-handle.
Not many make these, and those who do often make them in a poor quality.

Can anyone recommend a good torque wrench with T-handle?

Do you want one that's a fixed setting set or an adjustable one?

Seekonk and Wera make good fixed value T-handle ones, Tohnichi are also very good but finding a good adjustable one that click releases at set value is going to be much harder.

There's quite a few t-Handle torque drivers like Fix-it Sticks but they don't release at a set value, you will visually have to see the pin hit the torque number wanted while turning and then stop turning otherwise you'll over tighten.

Olsa makes a torque driver with a 1/4 female socket on top of handle to attach a T-handle but no clue if it's any good. It actually a good idea. My toque drivers are Wera, Felo and Utica's. It would be nice to have a T-Handle for the 3.0-5.4Nm drivers but they all have the thru shaft design preventing it.

There's these but have zero clue about them:

http://www.caltorque.com/default.php?page=prodDetails&prodId=1000

Park Bike Tools also makes one and the company typically makes pretty good tools that hold up in a professional environment but unsure about this one.

https://www.amazon.com/Park-Tool-ATD-1-2-Adjustable-Torque/dp/B076CX3WDT

 

[macgee]

Forgot to add that you may want to look at Wera pistol grip toque drivers and Geodore (aka: TorqueLeader UK) also offers very good torque drivers that you can attached a T-handle to but it maybe above your budget?

https://products.wera.de/en/torque_tools_series_7400_kraftform_torque_screwdrivers_with_a_factory_pre-set_measurement_value_7400_pre-set__pistol_handle.html

https://www.gedoretools.co.uk/product/gedore-7718130-757-06-torque-screwdriver-s-1-4-1-6-nm/

 

[bob15]

Here is the Seekonk pre-set

https://www.garagejournal.com/forum/showthread.php?t=474842