To avoid these ads, REGISTER NOW!

big maxx mr heater ignites real loud

JAckal

Well-known member
Joined
Oct 4, 2009
Messages
66
Location
Nw Arkansas
Sometimes it lights normally. Other times only the top burner lights and it takes 2 or 3 times to light. Then, it ignites loud. A large whoof!

Is there something I need to clean? Thermocouple, ignitor, etc.

Thanks,
Jack
 
To avoid these ads, REGISTER NOW!

arrowhead

Well-known member
Joined
Dec 11, 2008
Messages
681
Location
Stillwater, NY
I do bodywork in my garage and there's lots of dust so I take the side cover off and blow it out with compressed air pretty regularly. At one pint it was plugged up enough where the flames were not entirely contained in the heater tubes so be careful. I also blow out the fan / heat exchanger.
 
To avoid these ads, REGISTER NOW!
OP
J

JAckal

Well-known member
Joined
Oct 4, 2009
Messages
66
Location
Nw Arkansas
Thanks Arrowhead,

Mine is a machine shop, so I have oil smoke, solvent fumes and mist, and welding smoke constantly in the air.

I'll blow it out real good this weekend.

Thanks a again,
Jack
 
To avoid these ads, REGISTER NOW!
Top Bottom