To avoid these ads, REGISTER NOW!

big maxx vent

To avoid these ads, REGISTER NOW!

manwithtools

ALLIANCE MEMBER
Joined
Aug 24, 2015
Messages
13,759
Location
Lebanon, TN
It's the cap on top of the conduit that incoming power lines attach to if you have overhead service from the power company.

Weather_head_and_servoce_cable1.jpg
 
To avoid these ads, REGISTER NOW!

manwithtools

ALLIANCE MEMBER
Joined
Aug 24, 2015
Messages
13,759
Location
Lebanon, TN
I'd stay at least 36" away from any incoming power cables and the weather head. I think that's NEC requirement.

"Overhead service conductors must maintain a clearance of 3 feet from doors, porches, balconies, ladders, stairs, fire escapes, windows that open, or similar locations [230.9]"

Look here for explanation of NEC requirements regarding weather heads and service entrance conductor clearances.: http://ecmweb.com/code-basics/article-230-services-part-2
 
Last edited:

ForceFed70

Well-known member
Joined
Apr 27, 2010
Messages
3,441
Location
BC, Canada
Ah. The electrical mast with weather head on top.

As mentioned - that'll be in electrical code not HVAC. Not sure if NEC covers this or if it's justidiction of the PoCo. Although looks like there's language there as posted above.
 

CNGsaves

Well-known member
Joined
Sep 26, 2012
Messages
13,233
Location
KS and OK
We'll see if GJ Sparky's will chime in with specific details.

As for convenience of service, etc . . . . I'd sure avoid it. Other options to put heater in different location ?? Any location that you could install heater with a horizontal exhaust flue ??

Also, if heater flue above the roof is so tall it needs guywires, you sure don't want that close to your electrical weather head.
 
To avoid these ads, REGISTER NOW!
Top Bottom