I had an old Binks 310-14 air compressor in my basement for the last 40+ years. Never used it after I bought it. I painted it when I first bought it and put wheels on it and rolled it into my basement where it sat in a corner. Cleaning up my basement so it needs to go. Trying to determine a price and how original it is.
Here are the spec I can find on it from labels.
Binks 310-14
Serial# 176679L
Current Spec 220-3
The motor on it is a single phase motor
Motor
AO Smith Corporation
1.5 HP 60 cycle
1725 RPM
115/230 Volts
17 / 8.5 AMPS
currently wired for 230 volts / 8.5 amps
Tank
Built 1950 by Leader Iron Works Inc.
200 lbs max working pressure
250 max temp
Model U69U-70 70 gallons??
I cleaned it up and plugged it in after verifying the wiring. It pumped up to 165 lbs before the pressure switch shut down. I adjusted the motor slightly since it was mis-aligned. It has a couple of very small air leaks on the compression fittings (ones near the bottom of the pump) going to the gauge. I sprayed water on them and could still see a few small bubbles even after I cleaned the fittings. Other than that it appears to work well and no real leaks. Holds air nicely.
Trying to determine what it should reasonably sell for before I get rid of it. Need the room in my basement.
Thanks!
Here are the spec I can find on it from labels.
Binks 310-14
Serial# 176679L
Current Spec 220-3
The motor on it is a single phase motor
Motor
AO Smith Corporation
1.5 HP 60 cycle
1725 RPM
115/230 Volts
17 / 8.5 AMPS
currently wired for 230 volts / 8.5 amps
Tank
Built 1950 by Leader Iron Works Inc.
200 lbs max working pressure
250 max temp
Model U69U-70 70 gallons??
I cleaned it up and plugged it in after verifying the wiring. It pumped up to 165 lbs before the pressure switch shut down. I adjusted the motor slightly since it was mis-aligned. It has a couple of very small air leaks on the compression fittings (ones near the bottom of the pump) going to the gauge. I sprayed water on them and could still see a few small bubbles even after I cleaned the fittings. Other than that it appears to work well and no real leaks. Holds air nicely.
Trying to determine what it should reasonably sell for before I get rid of it. Need the room in my basement.
Thanks!
Attachments
-
IMG_20250310_004041111.jpg739.7 KB · Views: 26 -
IMG_20250309_201236861.jpg742.5 KB · Views: 24 -
IMG_20250309_201245114.jpg675.1 KB · Views: 23 -
IMG_20250309_201314419.jpg764.8 KB · Views: 24 -
IMG_20250309_201350596.jpg848.4 KB · Views: 27 -
IMG_20250310_004050699.jpg753.6 KB · Views: 25 -
IMG_20250310_004101991.jpg712 KB · Views: 23 -
IMG_20250310_014841776.jpg637.6 KB · Views: 22 -
IMG_20250310_015059280_HDR.jpg656.9 KB · Views: 23 -
IMG_20250310_015017025_HDR.jpg583 KB · Views: 24
