Brake Lathes- Rels Distribution

[cavalry]

With the cost of rotors lately I picked up a brake lathe at a very reasonable price. Its a Accuturn, I believe a 8922. It unfortunately was lacking some of the bells and the cones for hubless rotors. I knew before I bought that the adapters from the OE were expensive so no surprises. I luckily only really work on a small selection of vehicles so I do not need to go crazy at least to get started.
I found this adapter set that would work for me.
https://relsmfg.com/products/44710-light-truck-adapter-set?_pos=4&_sid=ea86870b6&_ss=r
I'm assuming its an Asian import at that price, but are they at least a reasonable quality? I am a bit confused why they have two different bell sizes, I was always under the impression you wanted matched sizes whenever possible?

 

[Andy1234]

This is a set on ebay that we sell that is much more complete (and usable): https://www.ebay.com/itm/3147027608...tyVtBAypzBdPg3SK6YD3/HT4HD|tkp:Bk9SR7qAr6zDYg

 

[cavalry]

This is a set on ebay that we sell that is much more complete (and usable): https://www.ebay.com/itm/314702760841?hash=item4945bf0b89:g:eCkAAOSwu2JijVYi&amdata=enc:AQAIAAAA4AoTL/hY1kCZHKGzf6+56Lue6fo/0Ef+Ff4z/cy1DUJCPw37DONn6YgudGGBzlx09mhEheOx3OOpXniH+murQFKxFM0GpDdQeSBAf+U0hihGw3hcV4khr0IR2f9tz4yQuKqKYftvvUcDcVMeL7KSaZQI/B2ftDMTdO3iEqaLVOniiESchqWaiBbKgDNyg00EHAvAi0ZMZygLKoB+IqmvqUCFg2wJMMtJdHgKMEcEAM52VvYrCrtRwsqh40fOL+FaZ4HFMXQD2/bXGJ1n/ityVtBAypzBdPg3SK6YD3/HT4HD|tkp:Bk9SR7qAr6zDYg

Thanks, I think I saw that one. I have all the hubbed adapters, the conical washers, spacers, spring, and some bells already, so unfortunately that includes quite a bit of redundant adapters I do not need. It would certainly be a nice package if I had nothing to work with.