raddksn
Well-known member
I’m having trouble finding this tee fitting in BSP taper.Can anybody point me in the direction of a supplier of BSP fittings! I’ve been searching Amozon , and can find just about any other fitting!
British standard pipe fittings
- Thread starter raddksn
- Start date
I’m having trouble finding this tee fitting in BSP taper.Can anybody point me in the direction of a supplier of BSP fittings! I’ve been searching Amozon , and can find just about any other fitting!
You can probably find one closer and possibly cheaper. This is just what popped up first.
Brass Centre Tee 1 centre x male & 2 x Female Threads, BSP threads for Air Fuel | eBay
BSP Threads for Air Fuel Water. BSP THREAD DATA. 1 x male centre & 2 x Female Threads. Brass Centre Tee.
www.ebay.com
jetmechabq
Active member
go to a parker store
You want all threads to be bspt?
Can anybody point me in the direction of a supplier of BSP fittings! I’ve been searching Amozon , and can find just about any other fitting!
8093 | FEMALE BSP X MALE BSPT BRANCH TEE | BRASS | Hydraulics Direct
The Metric fittings range is designed to adapt between various thread types including BSPP JIC and NPTF These adapters are suited for both domestic and international projects facilitating the connection of diverse components and reducing the requirement for multiple fitting sets Their
www.hydraulicsdirect.com
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
8093 - BSP to BSPT | Female BSP x Male BSPT Branch Tee | HydraulicHoses.com
Find 8093 BSP to BSPT Branch Tees at Hydraulic Hoses. Shop for Brass BSP to BSPT Fittings, provided by HydraulicHoses.com
www.hydraulichoses.com
rlitman
Well-known member
Really? Because then you need to source a BSP gauge, when NPT is much more readily available. Could something with BSP inline and an NPT port work? Like this:
csp
Well-known member
The Mitsubishi diesel uses BPT? I have a CC compact tractor as well and had no idea.
British Pipe threads are commonly used in country's using the metric system. In my working life I used to stock them for use in manufacturing machinery that went to our plants worldwide. Parker, McMaster, Grainger and similar industrial suppliers would have them. I even got some BSP fittings from Summit Racing for a Subaru that I was putting extra gauges in years ago.
Jack Ryan
Well-known member
In fact it was used in many of those countries even before they converted to metric.
Some BSP threads are similar to NPT - you just need to use a bigger spanner (like a bigger hammer, except for torque).
It's a bit like the Phillips/JIS thing.
Jack
Last edited:
CraigStu
Well-known member
Come on now, you can't put this question here and not tell us what you are working on. We want to know
Come on now, you can't put this question here and not tell us what you are working on. We want to know
Uuumm...
CraigStu
Well-known member
Oooops. I will go for my second coffee now.
LopezBart
Well-known member
Mcmaster 9151K295 should do it....
MacMcMacmac
Well-known member
I'm pretty sure most Japanese motorcycle oil pressure sensor fittings are BSP.
Jack Ryan
Well-known member
Sort of.
The Japanese fittings are not BSP, they are JIS B0203 JIS Tapered Pipe (PT). The JIS tapered thread and the BSPT connection are interchangeable.
Jack
CraigStu
Well-known member
mikegt4 it ***** getting old doesn't it. I am similar at 76. Just yesterday I needed a small piece of 1/4" rod. I have plenty of various pieces of rod on a rack. I was pi$$ed at myself that I felt the need to grab a caliper to make sure I grabbed the right piece. I won't even get into the 6mm vs 1/4" problem.
or the 3/8 vs. M10 nor 5/16 vs. 8mm.
As others have mentioned: many countries used BSP when they industrialized within the Empire but did not switch pipe all pipe standards when they went metric. In reality NPT is really only used in North America whereas BSP in hydraulics is almost "rest of the world". Well...except: I am working on my M-F 1440V (Iseki from Japan) this winter and it's hydraulics have a mixture of NPT, BSP, DIN and JIS threads along with one standard I can't even identify.