To avoid these ads, REGISTER NOW!

Budget Prairie Restore

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
Budget Rebuild

Folks may remember me from the "Hockey Stick Garage", which was really a labour of love, and years of work. Sadly, we couldn't take it when we sold the house. The "new place" had an existing garage, probably built in the 1950's. It's a flat roof, which is very strange in itself or our climate / city, with 7 foot (and change) wall height, with a length of 24 feet by 14 wide. Not huge. When we moved in, it was "good enough", and I really didn't think much would be done in it. Almost two years later, I definitely want to be using it full season, and get back to some garage projects.

Pic from backlane.
P3020338_zpsd2yueatr.jpg


A bit of a "fresh slate", I had to use whatever was there until now. Sadly, the "hook on a wall" is quite a bit cheaper and easier. Luckily, there is a bunch of extra storage for this sort of thing as well.

P3020337_zpshvv1izyc.jpg


The roof is in okay shape, but as you can see there is exactly ONE circuit. This will be kept in line with the previous garage, with a sub-panel and LOTS of power!
P3020345_zpskfsztbi3.jpg

A couple neat retro cabinets, that I think can be repurposed. Hopefully they will survive removal (when I insulate and vapor and sheeth it VERY soon)

P3020343_zpsohbtphc3.jpg


I think this opener is as old as I am. It has sort of failed this winter, when the overhead door froze to the ground (uninsulated door, frost, ice buildup). A replacement is in hand. It was sort of the straw that lead to the plans for the entire revamp.

Pardon the mess, it was February, and it was too damn cold to be in here. The built-in workbench is actually sorta near. It has two drawers and seems to be a good size. I am sure it has a few "stories".

P3020341_zps8zxp2spu.jpg


As I said earlier, the open walls have made it a BIT easier to just put things on nails. I will have to give some thought to really smart (and inexpensive) organization. The last garage had a very expensive wall system that didn't actually make it super easy to get in and out of the vehicle.

P3020339_zpsqkqazdso.jpg


The concrete is in decent shape, it will get floated to deal with a few low spots, but overall will be okay for the next many years.
 
To avoid these ads, REGISTER NOW!

55cadillacking

Well-known member
Joined
Apr 26, 2012
Messages
1,959
Location
Calgary
The Perogy Kid rides again. Will be following closely. Good to see you back and congrats on the new place.
 

HSpencer

ALLIANCE MEMBER
Joined
Nov 28, 2010
Messages
2,854
Location
South Central US
Thanks for posting. I like the garage and you will no doubt make it really set up and well organized. Cheers!!

Best Regards
Herb Spencer
 
OP
W

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
A new addition to the "Budget" theme. This relic cost a grand total of ….$75! There was definitely a "connection" to get this. It works, although the technique for changing speeds is a bit tough on the fingers. I'm looking forward to making some custom fab winter bike fenders for next winter.

The lowest speed is incredibly torquey, and it will make short work of the thin sheet metal it will be be used for.

eb912d85-0d01-46da-bff4-0e603d7ff97f_zpsa49tefbw.jpg

I figure this is from 1961 - 1965 approximately.
photo%204_zpseusfbh2t.jpg


The theme of this "rebuild" is really "budget", as I seem to have found everything at a super discount / slightly "used."
 
OP
W

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
Well after a prolonged radio silence there is progress. It started with a complete gut of the garage, which coincided with the acquisition of 2,000 sq feet of insulation. I just can't pass up a good deal! Following the messy itchy job I needed a wall solution that would maximize space, be efficient to install and be sorta neat. I came
Up with this.
image_zpsr20rfavv.jpeg


This is the back wall and where all the magic will happen
image_zps3rffkmtk.jpeg


More to come later today as I'm pecking this away on a mobile phone in spotty cell service.

If anyone's interested the metal material was Purchased from a swell guy right here in Manitoba
 
Last edited:
OP
W

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
More progress, actually able to start organizing and working properly, first
time in almost 18 months. Sheesh. Still lots to do, but at least this is really the finish line.
BE8F8776-D7AD-4BF4-9006-7C6FB4B26E30_zpszay9y2ip.jpg


1C4B9FD2-F772-4595-A4DE-4C5E23F10A64_zps2rxxzsqa.jpg
 
Last edited:
OP
W

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
Well, winter has truly set in now and the garage "blahs" are close behind. I did add a 240v heater, which keeps it at about 8 celcius, with the dial kept really low. I was hoping to keep it a bit cooler, but the heater cut-off is around 8.
3_heater_zpstg9subvu.jpg


I am a bit unhappy with the 'poor- man's shelving' that I put up last summer. My last garage had fancy Menards metal wall cabinets, but I was thinking this one would be a budget project. Maybe a bit of organizing would be a good start? Hmmm...
 
OP
W

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
A better shot of the best air hose reel this side of the Atlantic. Manitoba-made, Canadian steel, hand-made, does it get any better?
BD071A9E-2105-4D98-9C7B-3DD12339AF03_zpstxji4ewl.jpg


In case anyone's wondering, they are made by a Manitoba Hutterite Colony, and it was a very generous gift.
 
OP
W

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
One more pic. If anyone's willing to chime in, I am not super happy with the "open shelf" concept. I had all the brackets laying around and the plywood was an incredible find. I am not sure if metal closed cabinets will be in the works. I had them on the "Hockey Stick" project, but I am not ready to spend that sorta dough on the "Restore" project. Suggestions would be greatly appreciated!
 

nkachur

Well-known member
Joined
Jun 29, 2008
Messages
798
Location
Manitoba Canada
One more pic. If anyone's willing to chime in, I am not super happy with the "open shelf" concept. I had all the brackets laying around and the plywood was an incredible find. I am not sure if metal closed cabinets will be in the works. I had them on the "Hockey Stick" project, but I am not ready to spend that sorta dough on the "Restore" project. Suggestions would be greatly appreciated!
Well this diamond I the rough is looking better than it did when you first moved in.

Sent from my SM-G903W using Tapatalk
 
OP
W

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
Oh yes, it definitely is. Thanks for the compliment!

I am still missing the "Hockey Stick Garage", as that really was my pride and joy with its built in gym / full workshop and all.

This has becoming "liveable" in terms of projects, and have spent a bit of time doing some small metal fabrication work (bike mounts for a truck bed), and a few other things.

I am going to PM you re: Northern Tool / drain extender
 
OP
W

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
Yup, it looks like ANOTHER building project. Hoping to share this one in detail with the community. It won't be the "Hockey Stick Garage" and all the great times spent in there. This new addition will be split between work and working out. A bit of a blended approach. Hoping that I can keep as much space to myself as possible (marital negotiations will commence soon).
 
To avoid these ads, REGISTER NOW!

Norcal

Well-known member
Joined
Mar 16, 2008
Messages
13,786
A new addition to the "Budget" theme. This relic cost a grand total of ….$75! There was definitely a "connection" to get this. It works, although the technique for changing speeds is a bit tough on the fingers. I'm looking forward to making some custom fab winter bike fenders for next winter.

The lowest speed is incredibly torquey, and it will make short work of the thin sheet metal it will be be used for.

eb912d85-0d01-46da-bff4-0e603d7ff97f_zpsa49tefbw.jpg

I figure this is from 1961 - 1965 approximately.
photo%204_zpseusfbh2t.jpg


The theme of this "rebuild" is really "budget", as I seem to have found everything at a super discount / slightly "used."

Here is a link that should give a good idea of the age of the DP.

http://wiki.vintagemachinery.org/DeltaSerialNumbers.ashx
 

PhantomEB

Well-known member
Joined
Feb 6, 2006
Messages
6,967
Location
Medicine Hat, AB, Canuckistan
First and foremost, Ditch photobucket. Upload pics direct to site.

Second of all overhead cupboards can be built for cheap if you do the work yourself.

Third of all get a real natural gas heater and leave the winter blues alone.
 
OP
W

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
Thanks for the advice re: photobucket. It used to work as the gjournal site didnt seem to like uploads. I have a 220 electric heater ready to be installed, will make the winter pass by really easily. I am on the fence about shelves or something else, might play around before committing too much
 
OP
W

winnipegtibook

Well-known member
Joined
Jun 3, 2010
Messages
300
Location
100 miles from Tolstoi
OOPS, just when I thought I was DONE, I did this...
I have been silent on the forum for a year ++++, lots going on, and working on a venture (Prairie Velo) that gets everyone out moving, regardless of ability.
It will be the storefront/ repair space for the business. Never in my wildest dreams did I plan for this to happen....
 

Attachments

  • PV2021.jpg
    PV2021.jpg
    153.4 KB · Views: 86
To avoid these ads, REGISTER NOW!
Top Bottom