To avoid these ads, REGISTER NOW!

Bull's Snap-On Stuff, 12/26

Bull

Super Moderator
Joined
Dec 12, 2005
Messages
16,189
Location
MA
All items have been SOLD, thanks for looking.

This is a rarity for me, but to get a ratchet I wanted I had to buy this other stuff. Off it goes!

Midget 6M-70M ratchet. I did not open this one up, just gave it a few repeated baths in a jar of ATF and removed it to put a socket on it and work it back and forth. Works in both directions, holds a socket. I ratcheted it a lot on both directions...a total of three or four times the pawl got hung up, otherwise it worked well. Must be dirty in there. $25 shipped.

MVN 10A Breaker handle. Very nice condition. $18 shipped.

OEXM 12 combo. Scratches in finish, I noticed some slight chrome thinning on the open end. What I am saying is it's used wrench! $5 shipped SOLD PP

1x4 x 3/8 B-1458 bleeder? wrench. Very old, has pitting and wear. $8 shipped.

FX2 extension, has engraving but it is very light (can not catch fingernail on it) so it could be polished off, if you were so inclined. $5 shipped. SOLD PP

Set of four speed wrenches: 3/8x7/16, 7/16x1/2, 1/2x9/16, 9/16x5/8. The 1/2x9x16 has small chrome loss on the back side of the open ends. The 9/16x5/8 is a different, older looking style than the other three wrenches. If you want to shave in their reflection, you'll need to polish them. $40 shipped

Will take $80 shipped for the lot.

100_2593.jpg


100_2594.jpg


100_2595.jpg


100_2596.jpg


100_2597.jpg


100_2598.jpg


100_2600.jpg


100_2601.jpg
 
Last edited:
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
Top Bottom