Bull's Socket Needs

[Bull]

This is a long list. I'd like sockets that are USA Craftsman quality at least. I also prefer new or lightly used to anything with significant wear to the drive or fastener ends. Yes, some of these are "Hansen Tray OCD" sizes; I'm less concerned with those than the working sizes!

Metric 1/2 drive 6pt deep: 10-27 mm needed
Metric 1/2 drive 6pt shallow: 13, 16, 22-27
Metric 1/2 drive 12pt deep: 10-27
Metric 1/2 drive 12pt shallow: 18-20, 25

Metric 3/8 drive 6pt deep: 6-8, 10, 13, 20
Metric 3/8 drive 6pt shallow: 6-8, 18
Metric 3/8 drive 12pt deep: 6-9, 13, 15, 16, 18-20
Metric 3/8 drive 12pt shallow: 6, 8, 20

Metric 1/4 drive 6pt deep: 4.5, 5.5, 15
Metric 1/4 drive 6pt shallow: 4.5, 15
Metric 1/4 drive 12pt deep: 4.5-12, 15
Metric 1/4 drive 12pt shallow: 4.5-15

SAE 1/2 drive 6pt deep: 3/8, 7/16, 11/16, 1-1/4
SAE 1/2 drive 6pt shallow: 3/4
SAE 1/2 drive 12pt deep: 3/8, 7/16, 1-1/4

SAE 3/8 drive 6pt deep: 1/4, 5/16, 15/16, 1
SAE 3/8 drive 6 pt shallow: 3/4, 1
SAE 3/8 drive 12pt deep: 1/4, 5/16, 7/8, 15/16, 1
SAE 3/8 drive 12 pt shallow: 15/16, 1

SAE 1/4 drive 6pt deep: 9/16, 5/8
SAE 1/4 drive 6pt shallow: 9/16, 5/8
SAE1/4 drive 12pt deep: 3/16-5/8

SAE 1/2 drive deep impact: 3/8, 7/16, 5/8, 1-1/8, 1-1/4
SAE 1/2 drive shallow impact: 1-1/8, 1-1/4
SAE 3/8 drive shallow impact: full set needed

Metric 3/8 drive deep impact: full set needed
Metric 1/2 drive shallow impact: full set needed

Torx bits: 27, 30, 47, 50, 55, 60

Hex bits: 3/8, 5/32, 9/64, 1/8