burnin's tool sale

burnin53 · Jul 30, 2012

8/27/12 Snap-on stuff for sale below.
8/20/12 Update:More stuff added,same price. :thumbup:

This post is for the Craftsman stuff I have for sale.

Or trade for plomb or proto stuff.

There is more than 130 pieces here.
I'll take $130 shipped.Price drop:$100 shipped.All craftsman has been traded off.
US postal money order only.

Found two 1/4 drive rhft ratchets,a couple more underlined sockets,and a couple other pieces to add to this package,no pics of them yet,though.Same price. :beer:

First picture:
The back row is a 3/4 drive 2'' shallow socket,a 1/2 drive speeder and 1/2 drive "ell" that are both old script,and 3 phillips screwdrivers.

Second row is 1/2 drive sae =v= in sizes:
Deep 11/16 12-point,1/2 drive u-joint,
Shallow:1 1/4,1 1/8,1 1/16,1 1/16,1,15/16,7/8,7/8,13/16,3/4,11/16,11/16,5/8,5/8 six point,19/32,19,32,9/16 six point,9/16,9/16,1/2,1/2,7/16,7/16
All are 12-point except where specified.

Third row is 1/2 drive in sizes:1 1/4,1 1/4,13/16,3/4,17MM,5/8,7/16,5/8
These are -vv- series or later,except the 5/8,which is underlined.

Forth row is 3/8 drive sae in -v- and -vv- series and later codes in sizes:
3/8 u-joint,3/8 to 1/4 adaptor,
7/8 6-point,13/16,13/16,13/16,3/4,3/4,3/4,3/4,11/16 6-point,11/16,11/16,11/16,5/8,5/8,5/8,9/16,9/16,9/16,1/2,1/2,1/2,7/16,7/163/8,3/8,3/8,1/4
These are 12-point except where specified.

Fifth row is 3/8 deep 6-point:19mm,19,17,14,13,9,and 9/16.
Shallow:18,17,15,14,13,12,12 6-point,12,12,11,10,10 6-point,10,10 6-point,10 6-point,10,9 6-point,9,9, and 6mm. 12-point except where specified.

Front row:
3/8 drive shallow =v= series shallow 12 point:3/4,5/8,7/16(cracked,but return it for a new one at sears)
1/4 drive 12-point shallow:9/16,9/16,one G-series and one G1 series.
1/4 drive 6-point shallow:1/2 =v= series,1/2 =v= series,1/2 G series,7/16 -v- series,9/32 and 5/32 G1 series
1/4 drive deep six point:7/16 and 3/8 G1 series and a 9/32 G series

Second picture:
From the top:
A very old,but like new ratchet wrench,13/16x7/8
An underlined 7/8x13/16 deep offset dbe
An underlined 5/8x11/16 deep offset dbe
A 1/2x9/16 offset dbe
A 1/2x9/16 offset dbe stubby
A 5/16x3/8 brake bleeder wrench made in japan

Left column:
combos:
5/16-v- no part number
5/16-v- no part number
9mm-vv-
3/8-v-
7/16 =v=
7/16 -vv-
1/2 E series
1/2 =v=
1/2x9/16 flare nut -v-

Right column,doe:
7/16x17/32 tappet wrench,underlined craftsman
3/4x7/8 =v=
5/8x3/4 =v=
19/32x11/16-v-
1/2x9/16=v=
1/2x9/16=v=
1/2x9/16=v=
3/8x7/16 -v-
3/8x7/16-vv-
10x11mm -vv-

Everything listed is in good usable condition except for the one socket that is cracked.
A lot of this stuff looks like it's never been used.

burnin53 · Aug 4, 2012

Traded to browntown.This is the Wright stuff I have for sale or trade,
always looking for plomb and proto stuff.

First up is a 1/4 drive set,tools like new,box could use a repaint.
Includes:
a nice box,
a very nice fine tooth ratchet,
two extensions,
shallow sockets:
{2}1/2"
7/16 is missing,but I can substitute a craftsman if wanted.
{2}3/8
{2}11/32
5/16
9/32
1/4
7/32
{2}3/16
one 1/4 drive 3/8 square female socket

Deep:
1/2
7/16
3/8
11/32
5/16
1/4

Second is a 1/2 to 3/4 impact adaptor in good used shape.
Third is a 1/2 drive 9/16 12-point socket in nice shape.
Fourth is a nos Barberton,Ohio 3/8 drive 1/4" 6-point socket with light rust spots from sitting,but never used.This are not chromed.
Last is a 3/4 combo wrench in very nice shape.

Traded to browntown.I'll take $60 shipped for this lot.US postal m.o. only.

I also have quite a few of the nos 3/8 drive 1/4" sockets mentioned above.
I'll take $3 a piece shipped for them.
Still have a few of these for the old Wright (Barberton,Ohio) collector.

burnin53 · Aug 12, 2012

Make me an offer on the craftsman stuff. I'm not afraid to split this lot up,either.

burnin53 · Aug 20, 2012

Added a few good pieces to the craftsman lot,no extra charge. :thumbup:

burnin53 · Aug 27, 2012

Snap-on Everything but the sliding t-handles is traded off.

I bought these extensions off the truck a couple years ago,never used them much so they're in nice shape. No marks of any kind.

#1
part #204FXKLA 3/8 drive locking extensions
lengths:24,11,6 and 3"
snap-on gets about $200 for these,
I'll take $100 shipped.

#2
1/4 drive locking extensions
lengths:11 and 6"
snap-on gets about $75 for these,I'll take $40 shipped.SOLD!

I also have two 1/4 x1'' extensions #TMXI
snap-on gets $10 each for these,buy the 1/4 drive extensions above and I'll throw these in for an extra $10.

#3
Vintage snap-on air ratchet FAR70B 3/8 drive
This thing works like new. I've used it a couple times and it has good power.
The case is very nice.
Sockets are in good usable shape,most are like new,except the 9/16 looks like someone had some vice-grips on at some time.
The 13/16 shallow is new script and never used,everything else is old script.
There are two empty slots in the box,don't know if anything came there originally or not.
The original oil bottle is still there and in great shape.
I'll take $100 shipped. Sold to openg111