bushing tool for smaller bushings

[pascal32]

Hi there. Looking for advice on a bushing press that works with smaller bushing. I picked up a manual bushing tool (OEMTools 27212) which is great - problem is that the bushings on the 2010 Tucson are too small for the kit. I looked for smaller kits with no success. I was able to get the lower knuckle bushing swapped on the press - would just be a lot easier if I could do these on the car with a tool similar to the OEMTools 27212 but smaller - then I would be fusing with propping up the knuckle.

If there is a process for this I'm missing please let me know!

thanks