Cad drawing of building

[trs900]

Here is cad drawing of building I am looking to put up.. Price $95,000 total erected & materials, includes doors-coupalas- 6 inch 4000 psi slab with 2ft overhang all around on main building.. there will also be a 5ft concrete walk-apron around building and lean to..

45x100x16 ft with 4:12 pitch enclosed with 4 service doors-2 14x14 rollups & 1 10x10 rollup on lean to side.
25x100 x 12 ft lean to with 1:12 pitch

 

[trs900]

Finally got cad drawing up thanks to Chris..

 

[bmwpower]

I don't think it's quite big enough. You may want to reconsider the size.




....kidding of course. That's over 2x the size of my house!

 

[FarmerSid]

What software are you using to draw your shop in?

Cheers!

Sid

 

[trs900]

I know its kind of big but it will last me the rest of my life.. I am planning on adding rooms inside for office-wife's craft area and maybe some day park a motor home in it.. etc and since house is small it will make up the difference. also if you down size the price does not go down as much as you would think..

 

[trs900]

Farmersid I did not draw it-the builder did..

 

[W-Cummins]

I wouldn't have the over hang all the way around the large building if your going to have the lean to on the one side with a 2' overhang and a 16 and 12 eve heights your going to have a nice 100' long bird house on the one side! Go with 3 walls over hang on the main building and then a 2 ' over hang on the lean to part

William...

 

[trs900]

William send me an email with your # and I will call you