To avoid these ads, REGISTER NOW!

Calipers, Mics, Meters. OTC puller and Snap -On

abk241

Well-known member
Joined
Aug 22, 2014
Messages
310
Location
SF Bay Area, California
Location
Ca.
Price
...
Snap On 7 piece Metric Hex Bit set.
Set includes SO FAM4E through FAM10E...4mm - 10mm.
No markings.

$90.00 includes Priority Mail shipping with insurance to any US address.

100_1272_zps4a0f5e69.jpg


100_1271_zps243acd30.jpg






Snap On 3/8" Drive Double Square socket set. SOLD Thank you fowlwishes
Purchased in the late 80s/early 90s....excellent condition - no markings.

$80.00 includes Priority Mail shipping with insurance.

19466775-c608-445f-8700-2bba78d45141_zpsacf03320.jpg





Snap On SSDMR4B Magnetic Ratcheting Screwdriver SOLD Thank you Sean
Comes with 6 bits - 4 SO and 2 not...#3 Phillips not pictured but included.
No markings, has a few light scuffs from tool box wear.
$45.00 includes Priority Mail shipping with insurance to any US address.



Snap On 10 piece 1/4" drive 6 point socket set SOLD Thank you Sean
This set was purchased by me in the mid 80's and is complete EXCEPT for the 1/4" socket which has a MAC replacement.
I will also throw in a SO MVU8 1/4"drive universal as a bonus.
All of the SO sockets are unmarked and in like new condition and those that have date codes (8 out of 9) are dated 1980 - 1983.
$105.00 includes Priority Mail shipping with insurance.



Snap On Whitworth Socket Set - 3/8" Drive SOLD Thank you pi_guy
I bought this set sometime in the late '70s and only had the chance to use them a handful of times.
They are unmarked and in excellent condition.
$215.00 includes Priority Mail shipping with insurance.
 
Last edited:
To avoid these ads, REGISTER NOW!
OP
A

abk241

Well-known member
Joined
Aug 22, 2014
Messages
310
Location
SF Bay Area, California
Meters and more...

Ideal Test-Pro 61-401 DMM with 61-450 Current Clamp.
Used - Very Good condition.
Test leads not included...I used this mostly as a clamp-on so the original test leads are long since gone.
Discontinued by Ideal but a $210.00 value.
$70.00...includes Priority Mail shipping w/insurance.

100_0924_zpsaa7cca6a.jpg


100_0926_zps59dbd6c1.jpg


100_0927_zps8ead77bf.jpg


100_0928_zps74b0709b.jpg


100_0929_zps446143d1.jpg


Peerless Electrical System Analyzer Model 250 SOLD Thank you Muncie
Used - in good condition.
Works on 6 volt, 12 volt, and 24 volt auto/truck/marine systems.
This versatile unit will test voltage and current output from alternators, generators, and their regulators.
Will also test starter current draw and battery current capacity under load.
Comes with accessories as pictured in original packaging with 20 page instruction booklet.
$85.00...includes Priority Mail shipping w/insurance.

100_0945_zps0806a22c.jpg
 
Last edited:
OP
A

abk241

Well-known member
Joined
Aug 22, 2014
Messages
310
Location
SF Bay Area, California
Mitutoyo model 505-637-50 SOLD
0 to 6" Dial Caliper (0 to 150mm).
Stainless steel construction...Hardened.
Made in Japan.
I bought these in the mid 70's.
In excellent condition.
$45.00....includes shipping to any US address.




Central Disc Brake Micrometer Model 28LC
Range is 0.300" to 1.300".
Carbide tips.
Comes in original box with calibration wrench and 1" standard.

$40.00 includes shipping to any US address.

100_0902_zpse5cc31bb.jpg


100_0903_zps6299f8c8.jpg


100_0904_zps739eaf93.jpg


100_0906_zps4a510d66.jpg



General Telescoping Gage set # S-99
includes 4 gages in pouch:
5/16" - 1/2"
1/2" - 3/4"
3/4" - 1 1/4"
1 1/4" - 2 1/8"
All in excellent condition.

$35.00 includes shipping to any US address

100_1040_zps4679853d.jpg


100_1041_zps18916f56.jpg


100_1042_zps70578873.jpg


100_1043_zps16f4d8da.jpg


I have the following OTC pullers for sale.
All are used and in good condition.

OTC 1170 SOLD Thank you Muncie
Pilot Bearing Puller
Reach = 3/4", Spread = 1/2" - 1 1/2" ID

$40.00 plus shipping.

100_1305_zpsnglaqah9.jpg



OTC 522 SOLD Thank you dwp66
Large gear & pulley puller.
Variable reach, 2" - 7 3/4" spread.
BAR ONLY...will work with forcing screw from OTC 927 - SEE BELOW
$20.00 plus shipping.


Harmonic Balancer Puller
GENERIC - NO BRAND NAME - Unknown country of origin
This set is complete, used only a handfull of times.
All hex head bolts are grade 5.
Initials are lightly inscribed on yoke, can be seen in photo.

$5.00 plus shipping

balancer%20puller_zpscbua26p9.jpg



OTC 1022 SOLD Thank you plow
2 Ton 2 jaw reversible.
3 1/4" reach, 4" spread.
$8.00 plus shipping.



OTC 1023 SOLD Thank you plow
2 Ton 2/3 jaw reversible.
3 1/4" reach, 4 3/4" spread.
$20.00 plus shipping.



OTC 1027 SOLD Thank you plow
5 Ton 2/3 jaw reversible.
5 1/2" reach, 7" spread.
$25.00 plus shipping.



OTC 927 SOLD Thank you thecj3man
10 Ton Push Puller.
8 3/8" reach, 2 1/8" - 7 3/4" spread, 6 3/4" puller legs.
$55.00 plus shipping.



OTC 1123 SOLD Thank you thecj3man
Bearing Splitter....can be used with OTC 927 above.
1/2" - 4 5/8" spread.
$30.00 plus shipping.
 
Last edited:
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
Top Bottom