carlyle 3/8 metric socket set shallow

[blackz26]

Can't find any info on the 14 piece shallow 12 point metric set. 10-19, breaker bar, swivel joint, 3" extension, and ratchet. I have one on hold for 30 but wanted to see what it was new. The set I have one hold is essentially new, but considered used. Help please.

 

[TwoInch]

$30 ?

buy it.

 

[blackz26]

$30 ?

buy it.

Plus tax. The ratchet reminds me of a short version of a mac xr11.


Off subject have you gotten any pms me? If so its ok. If not I have what you are looking for and wanna deal.

 

[TwoInch]

sorry bud, i have been overlooking my pm box lately. i have all the williams ratchets, multiples of each actually. if you have an s-53 that is in primo condition, i might be interested.

 

[DTB]

I can't find that set in metric in my Napa T&E book.Closest thing that comes up is the 14 pc 3/8 drive 12 point shallow SAE set with the items listed above. CHT SS38114. Roughly $87 bucks.

 

[blackz26]

sorry bud, i have been overlooking my pm box lately. i have all the williams ratchets, multiples of each actually. if you have an s-53 that is in primo condition, i might be interested.

No sorry

Back to the topic lol

 

[blackz26]

I can't find that set in metric in my Napa T&E book.Closest thing that comes up is the 14 pc 3/8 drive 12 point shallow SAE set with the items listed above. CHT SS38114. Roughly $87 bucks.

Cool. Safe to assume metric would be the same price? I don't have the part number yet. Will have next week though

 

[NiteWolf]

The part number should be CHTSS38117M (17 piece set) , it seams to be missing 2 (8-9mm) sockets and one 6" extension. and about $10 more the the SAE set

 

[blackz26]

The part number should be CHT38117MSS, it seams to be missing 2 (8-9mm) sockets and one 6" extension

No. Its in its original case and packaging minus the plastic. No missing holes

 

[NiteWolf]

Hmm odd thats the closest metric set listed. But it should be close to the $90 mark new give or take a bit.

 

[blackz26]

Hmm odd thats the closest metric set listed. But it should be close to the $90 mark new give or take a bit.

Someone's NOS they pawned off maybe?

 

[blackz26]

Bump for more info?

 

[djb2]

A little off-topic, but I'm curious.

Is this a regular socket set, or a true shallow set.
I often see standard sockets called "shallow".

I have a few true shallow sockets. They are only deep enough for a bolt head, not a nut with a few threads sticking out. Their advantage is fitting where other sockets won't, but they are pretty much a specialty tool.

 

[blackz26]

A little off-topic, but I'm curious.

Is this a regular socket set, or a true shallow set.
I often see standard sockets called "shallow".

I have a few true shallow sockets. They are only deep enough for a bolt head, not a nut with a few threads sticking out. Their advantage is fitting where other sockets won't, but they are pretty much a specialty tool.

Standard shallow. Not extra shallow lol

 

[blackz26]

The part number is ss38117m.

Turns out it is a 17 piece set. Still a different part number though. Pics to come soon. Its 8-19 12 point short with 3 and 6" extention, swivel and ratchet.

 

[blackz26]

Obviously never used. Checked Napa when I picked up my standard flare crowsfoot set. Retails for 80+ tax. I got it for 30 out the door from the pawn shop. I feel I did pretty good.

 

[blackz26]

The ratchet number is R38TD. Its definitely not 38 teeth. I count 60. Is that right? Maybe 38 is 3.8° swing?

 

[TwoInch]

or maybe 38 means 3/8s drive

btw, 60t is not 3.8*

 

[DTB]

3/8 drive.They are 60 tooth.They are pretty decent actually.I had to warranty an older danaher 36 tooth model and got the same ratchet but with quick release.I use it quite a bit at work for a couple of months now and it's been great.

 

[blackz26]

Cool
Thanks for the info