To avoid these ads, REGISTER NOW!

Caulking gap between add-on Patio and Brick House

Leaky88

Well-known member
Joined
Nov 1, 2014
Messages
274
Location
Illinois (Temporarily)
Hi,
Previous owner added a Patio and the gap between it and house was filled with some type of Sealant which is failing.
I removed the deterioration section and found no Backer-Rod per se. It appears anything within reach was shoved into
the gap and an unknown type of Sealant applied. I assume it was not a Self-Leveling Sealant based on the angle and lack of filler placed in the gap.

Q. Can someone please tell or reference me to a method and/or product to re-seal this and make it look like the sound sealant?

Any recommendation would be most welcomed.

Thanks
Leaky
 

Attachments

  • IMG_3157.jpeg
    IMG_3157.jpeg
    1.4 MB · Views: 42
  • IMG_3156.jpeg
    IMG_3156.jpeg
    1.5 MB · Views: 43
To avoid these ads, REGISTER NOW!

CombatNinja

Well-known member
Joined
Aug 24, 2013
Messages
1,456
Rip it all out, fill it with the appropriate size backer rod, finish with Sika Flex. I like to finish my joints with sand on top. Gives it a finish that looks closer to the concrete and makes the joints a bit less noticeable. Don't try to mess about and preserve some portion of it. If part of it was going to ****, the rest is right behind it. Do it right and you'll be good for 5 years or more depending on sun exposure and how much freeze/thaw you get.
 
To avoid these ads, REGISTER NOW!
OP
L

Leaky88

Well-known member
Joined
Nov 1, 2014
Messages
274
Location
Illinois (Temporarily)
Rip it all out, fill it with the appropriate size backer rod, finish with Sika Flex. I like to finish my joints with sand on top. Gives it a finish that looks closer to the concrete and makes the joints a bit less noticeable. Don't try to mess about and preserve some portion of it. If part of it was going to ****, the rest is right behind it. Do it right and you'll be good for 5 years or more depending on sun exposure and how much freeze/thaw you get.
Thanks
 

nadogail

Well-known member
Joined
Jan 23, 2009
Messages
32,062
Location
Coronado, CA
Rip it all out, fill it with the appropriate size backer rod, finish with Sika Flex. I like to finish my joints with sand on top. Gives it a finish that looks closer to the concrete and makes the joints a bit less noticeable. Don't try to mess about and preserve some portion of it. If part of it was going to ****, the rest is right behind it. Do it right and you'll be good for 5 years or more depending on sun exposure and how much freeze/thaw you get.
What he said. I have used foam pipe insulation when the gap was big and I had no backer rod in my van.
 
To avoid these ads, REGISTER NOW!
Top Bottom