To avoid these ads, REGISTER NOW!

Ceiling tiles and sprinklers

Speleo

Well-known member
Joined
Sep 10, 2012
Messages
178
Location
Fort Wayne IN
Hello,

I want to change out ceiling tiles in my warehouse. The fire sprinkler heads were installed thru the tiles with a collar. Is there a workaround to replace those tiles, and trim the hole around the sprinkler, without removing the head?

Thanks
 
To avoid these ads, REGISTER NOW!

Scud67

Well-known member
Joined
Mar 1, 2014
Messages
331
Location
Metrowest Boston MA
The collars come off, the head remains in place. Just be careful removing them - if the sprinkler heads have the glass type of actuator. The collars should just twist 1/4 turn or unscrew from the head.
 

Caman

Well-known member
Joined
Feb 1, 2015
Messages
486
Location
MN
If it's the collars/escutions I have here, they are just siliconed in place and can easily be pried off.
 
To avoid these ads, REGISTER NOW!

Caman

Well-known member
Joined
Feb 1, 2015
Messages
486
Location
MN
LOL have you ever smelled stagnant sprinkler water? Certainly not "potable" or even desirable by any stretch of the imagination!

I can only imagine what 10 year old sprinkler water smells like. This building is less than a year old and had a couple fittings leak, the water coming from them when we disconnected the heads smelled like a high school football locker room. :wtf:
 

LS6 Tommy

Well-known member
Joined
Dec 27, 2013
Messages
26,162
Location
Northern NJ
Our sprinkler guys went to replace a leaky head back in November. They thought they had everything isolated and drained properly. They didn't. The minute they touched it with the head wrench it blew apart. Made quite the mess...
 
Last edited:

NUTTSGT

Super Moderator
Staff member
Joined
Sep 14, 2009
Messages
51,093
Location
Northern Central Ohio
OH come on it's warehouse certainly it could a good soaking wash ! :shocking:

The other night we had a call from the water dept guys wanting to know if we were flowing any hydrants, nope, not us. They said it appeared that somebody was opening and closing valves somewhere in town and it had lowered the water level in both water towers.

About 3 am, 7-8 hours later, they call back, they found the leak. One of the factories had a sprinkler line break during the freeze we have had. Once it started to warm up and the ice melted, it started to flow water after everybody had went home.

Not only would I not want to clean up that mess, I'd hate to be paying that water bill.
 

Caman

Well-known member
Joined
Feb 1, 2015
Messages
486
Location
MN
The other night we had a call from the water dept guys wanting to know if we were flowing any hydrants, nope, not us. They said it appeared that somebody was opening and closing valves somewhere in town and it had lowered the water level in both water towers.

About 3 am, 7-8 hours later, they call back, they found the leak. One of the factories had a sprinkler line break during the freeze we have had. Once it started to warm up and the ice melted, it started to flow water after everybody had went home.

Not only would I not want to clean up that mess, I'd hate to be paying that water bill.

At my place the fire sprinklers aren't connected to a water meter, it comes directly from the 12inch main to the water pump.
 

72Anthony

Well-known member
Joined
May 22, 2010
Messages
296
Location
Houston, TX
The other night we had a call from the water dept guys wanting to know if we were flowing any hydrants, nope, not us. They said it appeared that somebody was opening and closing valves somewhere in town and it had lowered the water level in both water towers.

About 3 am, 7-8 hours later, they call back, they found the leak. One of the factories had a sprinkler line break during the freeze we have had. Once it started to warm up and the ice melted, it started to flow water after everybody had went home.

Not only would I not want to clean up that mess, I'd hate to be paying that water bill.

Sounds like they need to get their water flow alarm serviced...
 

Scud67

Well-known member
Joined
Mar 1, 2014
Messages
331
Location
Metrowest Boston MA
Sprinkler mains are not metered. But the flow alarm should have triggered and the leak found right away... and yes, sprinkler water is gross! It is black and nasty for a few minutes as it flushes out the lines.
 

SEV22XS

Well-known member
Joined
Jun 26, 2014
Messages
211
LOL have you ever smelled stagnant sprinkler water? Certainly not "potable" or even desirable by any stretch of the imagination!

I have certainly smelled plenty of sprinkler water after people broke the lines or it froze and broke. I worked at big hotel that seemed every year we had some sprinkler issues wedding dresses hung on heads random frozen lines you name it.
 

n8n

Well-known member
Joined
Mar 11, 2014
Messages
3,607
Location
Curtis Bay, MD
I have certainly smelled plenty of sprinkler water after people broke the lines or it froze and broke. I worked at big hotel that seemed every year we had some sprinkler issues wedding dresses hung on heads random frozen lines you name it.

Well, there's one wedding dress that's not ever going to get remade into a christening gown...!
 
To avoid these ads, REGISTER NOW!
Top Bottom