To avoid these ads, REGISTER NOW!

Ceramic Carpet vs Epoxy

eriku19tex

Member
Joined
Jul 11, 2018
Messages
8
Location
Houston, TX
Whats up everyone,

I searched the forum but cant find anything on Ceramic Carpet. Seems like an alternative to a full broadcast/rejection epoxy system - similar idea, just an aggregate instead of flakes.


http://www.generalpolymers.com/drop/400-425.pdf

My Sherwin Williams friend said the cost was about $2sq ft, yet to get real pricing.

Anyone here have any experience using/installing this type of finish? :thumbup:
 
To avoid these ads, REGISTER NOW!

Armorpoxy

Well-known member
Joined
Aug 18, 2013
Messages
3,735
Location
NJ
Hi,
What you are referring to is a 'quartz broadcast' floor. This is a built-up system of epoxy and quartz layers and then a protective topcoat. If SW is quoting you make sure that they quote at least 2-3 coats of topcoat, otherwise the surface will be like a giant sheet of sandpaper and very difficult, if not impossible, to clean.

We can also set this up using polyaspartic (less time/higher cost).

Actual cost of a system like this is about double due to the significant amount of material required. These floors are VERY durable and long-lasting, but often not used in residential garages due to the cost.

Please email us directly for more info, color charts, and a formal quote.
 

LegacyIndustrial

ALLIANCE MEMBER
Joined
Jun 7, 2010
Messages
7,994
Location
deerfield, IL
Double broadcast of quartz for best results. One will look sketchy.

It’s not popular in home garages because:
A. Expensive
B. Not enough traffic to warrant it, total overkill.

To further this point... our install company installs full-flake systems in small automotive garages.

Sent from my iPhone using The Garage Journal mobile app
 
Last edited:
To avoid these ads, REGISTER NOW!

850xpeps

Well-known member
Joined
Aug 6, 2017
Messages
1,365
Would this be something like a product I’ve seen used called stone hard?

It was resin, then broadcast, then resin, broadcast, resin. They would vacumn in between broadcast and resin to remove rock that didn’t adhere. Then after I think 3 or 4 stone coats they did about 5 layers of topcoat resin.
 
To avoid these ads, REGISTER NOW!
Top Bottom