Cheap n Easy source for a 1 5/16 very deep socket?

[Danglerb]

Mechanic has a very limited need for a 1 5/16" very deep socket, anybody know of a common source for a cheap one? Impact preferred.

 

[3/8"indestro]

don't know what cheap is for you,but try this one:
http://cgi.ebay.com/ebaymotors/Impa...024QQitemZ370048688360QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/2-Apex-3-4-Driv...yZ109565QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/SNAP...012QQitemZ220232389104QQrdZ1QQsspagenameZWDVW

 

[ImportTuner]

The first two ebay links appear to be cheap enough ...

 

[April]

Not terribly deep, and 12pt, but it is cheap:
http://www.amazon.com/dp/B000BDG91K/?tag=atomicindus08-20

Also this, in 6pt:
http://www.amazon.com/dp/B000CMDS6O/?tag=atomicindus08-20

Otherwise, just take a look at this search for stuff that Amazon.com sells directly:
http://www.amazon.com/dp/B000CMDS6O/?tag=atomicindus08-20

The KD Impact sells for $16, which is probably a lot less than the auction will end at, if you include shipping.

 

[nissan_crawler]

None of those are deep enough. Personally, if it's nothing highly precise, I've just bought a cheap impact socket, cut it in half, welded a piece of heavy pipe in between and went with it. Quick, cheap, and you can make it whatever length you need.

 

[Danglerb]

This is for the locking nut on a motorcycle hub and needs to fit over the whole axle sticking out the side. Could be a job for cutting in half and welding on a pipe.

Thanks for all the suggestions, one of them is bound to work.

 

[eschoendorff]

None of those are deep enough. Personally, if it's nothing highly precise, I've just bought a cheap impact socket, cut it in half, welded a piece of heavy pipe in between and went with it. Quick, cheap, and you can make it whatever length you need.

That is soooo ghetto. I love it!!!!

 

[nissan_crawler]

That is soooo ghetto. I love it!!!!

Yep, we had a 2.5' long 1 1/4" socket we made at home for some farm equipment. You would think the welding would make them frag easier, but we never did shell one.

 

[wilbilt]

Here you go...
http://www.monstronix.com/kti71522-p-53469.html

I'm sure it's welded together, too.

 

[Danglerb]

That looks pretty good, but I wonder about the diameter inside.