Cheapest solution for floor

[flipflop1970]

I have a 12X20 detached garage. I am in the process of converting it to a game room. the problem I have is the floor is pitted and it has a crack that goes the width of the floor about 3/4 of the way into the garage.

The floor is fairly level except the crack. to the back left corner of the garage it has a pitch to it maybe about 1/4 inch at most.

I want to have a level floor and the pits filled.

what would be the most economoical (cheapest)way to finish this floor as well as easy to do.

 

[astroracer]

Is the garage going to see duty as a parking garage also? If not I have a suggestion for you.
This is what I did in my machine shop. I put down a grid work of 1x3's, on
16" centers, over a layer of visqueen. I put styrofoam insulation in all of the squares and covered that with 3/4" T&G OSB. I painted mine but you could put any floor covering you want over yours. I did this because it is much easier for me to stand on a wood floor then the concrete and the floor is always warm too...
Mark

 

[flipflop1970]

Is the garage going to see duty as a parking garage also? If not I have a suggestion for you.
This is what I did in my machine shop. I put down a grid work of 1x3's, on
16" centers, over a layer of visqueen. I put styrofoam insulation in all of the squares and covered that with 3/4" T&G OSB. I painted mine but you could put any floor covering you want over yours. I did this because it is much easier for me to stand on a wood floor then the concrete and the floor is always warm too...
Mark

That sounds like a plan. What I will be using my garage for is a place where I can host poker games and get togethers. I am using this unused space due to lack of room in my house. So The floor deosn;t need to be hevay duty just level.

Thanks...

I anyone else has any ideas keep em coming!

 

[TedBear]

I have a 12X20 detached garage. I am in the process of converting it to a game room. the problem I have is the floor is pitted and it has a crack that goes the width of the floor about 3/4 of the way into the garage.

The floor is fairly level except the crack. to the back left corner of the garage it has a pitch to it maybe about 1/4 inch at most.

I want to have a level floor and the pits filled.

what would be the most economoical (cheapest)way to finish this floor as well as easy to do.

I did the "social area" of my garage in peel-and-stick 12" tiles from Menards. They're about 64 cents each and really easy to put down. They sell epoxy crack and hole filler for about $18 per kit which might help you to smooth things out before applying the tile. I'm pretty happy with mine, I even park my Harley on them with a pad under the kickstand and cold tires.